Linux

☆ Linux奮闘記 (16)　新しい世紀の始まり?　'2001/1- ☆

今年のLinuxはどうなっていくのでしょうか、さてデスクトップでの活躍は、Officeに対抗出来る完成度の高い商品のリリ－スは。サ－バ環境としては、もう少し敷居が低くなると、需要も大幅拡大か。今年はなんといっても、java対応のi-mode(503)でしょうね。キ－ワ－ドは「必要な情報を手のひらへ」。Webテクノロジ－は総じてすばらしいと思う。しかし技術者にとっては、苦しい時代が来た。研修などを受ければすぐに仕事が出来る時代は終わり、普段から切磋琢磨していかなければならないというとても厳しい時代に突入し始めているのではないか。

perl でSMTPに挑戦

00/12/28 perlで添付ファイルの転送。

root@redhat6 /tmp]# cd MIME-Base64-2.11
[root@redhat6 MIME-Base64-2.11]# perl Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for MIME::Base64

root@redhat6 MIME-Base64-2.11]# make
mkdir blib
mkdir blib/lib
mkdir blib/lib/MIME
mkdir blib/arch
mkdir blib/arch/auto
mkdir blib/arch/auto/MIME
mkdir blib/arch/auto/MIME/Base64
mkdir blib/lib/auto
mkdir blib/lib/auto/MIME
mkdir blib/lib/auto/MIME/Base64
mkdir blib/man3
cp Base64.pm blib/lib/MIME/Base64.pm
cp QuotedPrint.pm blib/lib/MIME/QuotedPrint.pm
/usr/bin/perl -I/usr/lib/perl5/5.00503/i386-linux -I/usr/lib/perl5/5.00503 /usr/
lib/perl5/5.00503/ExtUtils/xsubpp  -typemap /usr/lib/perl5/5.00503/ExtUtils/type
map Base64.xs >xstmp.c && mv xstmp.c Base64.c
cc -c  -Dbool=char -DHAS_BOOL -I/usr/local/include -O2    -DVERSION=\"2.11\" -DX
S_VERSION=\"2.11\" -fpic -I/usr/lib/perl5/5.00503/i386-linux/CORE  Base64.c
Running Mkbootstrap for MIME::Base64 ()
chmod 644 Base64.bs
LD_RUN_PATH="" cc -o blib/arch/auto/MIME/Base64/Base64.so  -shared -L/usr/local/
lib Base64.o
chmod 755 blib/arch/auto/MIME/Base64/Base64.so
cp Base64.bs blib/arch/auto/MIME/Base64/Base64.bs
chmod 644 blib/arch/auto/MIME/Base64/Base64.bs
Manifying blib/man3/MIME::Base64.3
Manifying blib/man3/MIME::QuotedPrint.3
[root@redhat6 MIME-Base64-2.11]#

[root@redhat6 MIME-Base64-2.11]# make test
PERL_DL_NONLAZY=1 /usr/bin/perl -Iblib/arch -Iblib/lib -I/usr/lib/perl5/5.00503/
i386-linux -I/usr/lib/perl5/5.00503 -e 'use Test::Harness qw(&runtests $verbose)
; $verbose=0; runtests @ARGV;' t/*.t
t/base64............ok
t/quoted-print......ok
All tests successful.
Files=2,  Tests=306,  2 wallclock secs ( 1.48 cusr +  0.12 csys =  1.60 CPU)
[root@redhat6 MIME-Base64-2.11]#

[root@redhat6 MIME-Base64-2.11]# make install
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/auto/MIME/Base64/Base64.so
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/auto/MIME/Base64/Base64.bs
Files found in blib/arch --> Installing files in blib/lib into architecture depe
ndend library tree!
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/MIME/Base64.pm
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/MIME/QuotedPrint.pm
Installing /usr/lib/perl5/man/man3/MIME::Base64.3
Installing /usr/lib/perl5/man/man3/MIME::QuotedPrint.3
Writing /usr/lib/perl5/site_perl/5.005/i386-linux/auto/MIME/Base64/.packlist
Appending installation info to /usr/lib/perl5/5.00503/i386-linux/perllocal.pod
[root@redhat6 MIME-Base64-2.11]#

[root@redhat6 Jcode-0.66]# perl Makefile.PL
Writing Makefile for Jcode::Unicode
Writing Makefile for Jcode

[root@redhat6 Jcode-0.66]# make
mkdir blib
mkdir blib/lib
mkdir blib/arch
mkdir blib/arch/auto
mkdir blib/arch/auto/Jcode
mkdir blib/lib/auto
mkdir blib/lib/auto/Jcode
mkdir blib/man3
cp Jcode.pm blib/lib/Jcode.pm
cp mac_install.pl blib/lib/mac_install.pl
cp Jcode/Unicode/Constants.pm blib/lib/Jcode/Unicode/Constants.pm
cp Jcode/H2Z.pm blib/lib/Jcode/H2Z.pm
cp Jcode/Tr.pm blib/lib/Jcode/Tr.pm
cp Jcode/Constants.pm blib/lib/Jcode/Constants.pm
cp Jcode/Unicode/NoXS.pm blib/lib/Jcode/Unicode/NoXS.pm
cp win_install.pl blib/lib/win_install.pl
make[1]: Entering directory `/tmp/Jcode-0.66/Unicode'
mkdir ../blib/arch/auto/Jcode/Unicode
mkdir ../blib/lib/auto/Jcode/Unicode
cp _test.pl ../blib/lib/Jcode/_test.pl
cp Unicode.pm ../blib/lib/Jcode/Unicode.pm
/usr/bin/perl -I/usr/lib/perl5/5.00503/i386-linux -I/usr/lib/perl5/5.00503 /usr/
lib/perl5/5.00503/ExtUtils/xsubpp  -typemap /usr/lib/perl5/5.00503/ExtUtils/type
map Unicode.xs >xstmp.c && mv xstmp.c Unicode.c
cc -c  -Dbool=char -DHAS_BOOL -I/usr/local/include -O2    -DVERSION=\"1.01\" -DX
S_VERSION=\"1.01\" -fpic -I/usr/lib/perl5/5.00503/i386-linux/CORE  Unicode.c
Running Mkbootstrap for Jcode::Unicode ()
chmod 644 Unicode.bs
LD_RUN_PATH="" cc -o ../blib/arch/auto/Jcode/Unicode/Unicode.so  -shared -L/usr/
local/lib Unicode.o
chmod 755 ../blib/arch/auto/Jcode/Unicode/Unicode.so
cp Unicode.bs ../blib/arch/auto/Jcode/Unicode/Unicode.bs
chmod 644 ../blib/arch/auto/Jcode/Unicode/Unicode.bs
Manifying ../blib/man3/Jcode::Unicode.3
make[1]: Leaving directory `/tmp/Jcode-0.66/Unicode'
Manifying blib/man3/Jcode.3
Manifying blib/man3/Jcode::Unicode::Constants.3
Manifying blib/man3/Jcode::Unicode::NoXS.3
[root@redhat6 Jcode-0.66]#

[root@redhat6 Jcode-0.66]# make test
make[1]: Entering directory `/tmp/Jcode-0.66/Unicode'
make[1]: Leaving directory `/tmp/Jcode-0.66/Unicode'
PERL_DL_NONLAZY=1 /usr/bin/perl -Iblib/arch -Iblib/lib -I/usr/lib/perl5/5.00503/
i386-linux -I/usr/lib/perl5/5.00503 -e 'use Test::Harness qw(&runtests $verbose)
; $verbose=0; runtests @ARGV;' t/*.t
t/convert...........ok
t/getcode...........ok
t/h2z...............ok
t/mime..............ok
t/new...............ok
t/tr................ok
All tests successful.
Files=6,  Tests=113, 72 wallclock secs (70.82 cusr +  1.09 csys = 71.91 CPU)
make[1]: Entering directory `/tmp/Jcode-0.66/Unicode'
No tests defined for Jcode::Unicode extension.
make[1]: Leaving directory `/tmp/Jcode-0.66/Unicode'


[root@redhat6 Jcode-0.66]# make install
make[1]: Entering directory `/tmp/Jcode-0.66/Unicode'
make[1]: Leaving directory `/tmp/Jcode-0.66/Unicode'
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/auto/Jcode/Unicode/Unicode.
so
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/auto/Jcode/Unicode/Unicode.
bs
Files found in blib/arch --> Installing files in blib/lib into architecture depe
ndend library tree!
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/Jcode.pm
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/mac_install.pl
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/Jcode/Unicode/Constants.pm
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/Jcode/Unicode/NoXS.pm
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/Jcode/H2Z.pm
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/Jcode/Tr.pm
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/Jcode/Constants.pm
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/Jcode/_test.pl
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/Jcode/Unicode.pm
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/win_install.pl
Installing /usr/lib/perl5/man/man3/Jcode::Unicode.3
Installing /usr/lib/perl5/man/man3/Jcode.3
Installing /usr/lib/perl5/man/man3/Jcode::Unicode::Constants.3
Installing /usr/lib/perl5/man/man3/Jcode::Unicode::NoXS.3
Writing /usr/lib/perl5/site_perl/5.005/i386-linux/auto/Jcode/.packlist
Appending installation info to /usr/lib/perl5/5.00503/i386-linux/perllocal.pod


[root@redhat6 /tmp]# cd IO-stringy-1.216
[root@redhat6 IO-stringy-1.216]# perl Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for IO-stringy
[root@redhat6 IO-stringy-1.216]# make
mkdir blib
mkdir blib/lib
mkdir blib/arch
mkdir blib/arch/auto
mkdir blib/arch/auto/IO-stringy
mkdir blib/lib/auto
mkdir blib/lib/auto/IO-stringy
mkdir blib/man3
cp lib/IO/Wrap.pm blib/lib/IO/Wrap.pm
cp lib/IO/Lines.pm blib/lib/IO/Lines.pm
cp lib/IO/WrapTie.pm blib/lib/IO/WrapTie.pm
cp lib/IO/InnerFile.pm blib/lib/IO/InnerFile.pm
cp lib/IO/AtomicFile.pm blib/lib/IO/AtomicFile.pm
cp lib/IO/Stringy.pm blib/lib/IO/Stringy.pm
cp lib/IO/ScalarArray.pm blib/lib/IO/ScalarArray.pm
cp lib/IO/Scalar.pm blib/lib/IO/Scalar.pm
Manifying blib/man3/IO::Wrap.3
Manifying blib/man3/IO::Lines.3
Manifying blib/man3/IO::InnerFile.3
Manifying blib/man3/IO::WrapTie.3
Manifying blib/man3/IO::AtomicFile.3
Manifying blib/man3/IO::Stringy.3
Manifying blib/man3/IO::ScalarArray.3
Manifying blib/man3/IO::Scalar.3

[root@redhat6 IO-stringy-1.216]# make test
PERL_DL_NONLAZY=1 /usr/bin/perl -Iblib/arch -Iblib/lib -I/usr/lib/perl5/5.00503/
i386-linux -I/usr/lib/perl5/5.00503 -e 'use Test::Harness qw(&runtests $verbose)
; $verbose=0; runtests @ARGV;' t/*.t
t/IO_Lines..........ok
t/IO_Scalar.........ok
t/IO_ScalarArray....ok
t/IO_WrapTie........ok
All tests successful.
Files=4,  Tests=54,  6 wallclock secs ( 6.21 cusr +  0.39 csys =  6.60 CPU)
[root@redhat6 IO-stringy-1.216]#

[root@redhat6 IO-stringy-1.216]# make install
Installing /usr/lib/perl5/site_perl/5.005/IO/Wrap.pm
Installing /usr/lib/perl5/site_perl/5.005/IO/Lines.pm
Installing /usr/lib/perl5/site_perl/5.005/IO/WrapTie.pm
Installing /usr/lib/perl5/site_perl/5.005/IO/InnerFile.pm
Installing /usr/lib/perl5/site_perl/5.005/IO/AtomicFile.pm
Installing /usr/lib/perl5/site_perl/5.005/IO/Stringy.pm
Installing /usr/lib/perl5/site_perl/5.005/IO/ScalarArray.pm
Installing /usr/lib/perl5/site_perl/5.005/IO/Scalar.pm
Installing /usr/lib/perl5/man/man3/IO::Wrap.3
Installing /usr/lib/perl5/man/man3/IO::Lines.3
Installing /usr/lib/perl5/man/man3/IO::InnerFile.3
Installing /usr/lib/perl5/man/man3/IO::WrapTie.3
Installing /usr/lib/perl5/man/man3/IO::AtomicFile.3
Installing /usr/lib/perl5/man/man3/IO::Stringy.3
Installing /usr/lib/perl5/man/man3/IO::ScalarArray.3
Installing /usr/lib/perl5/man/man3/IO::Scalar.3
Writing /usr/lib/perl5/site_perl/5.005/i386-linux/auto/IO-stringy/.packlist
Appending installation info to /usr/lib/perl5/5.00503/i386-linux/perllocal.pod
[root@redhat6 IO-stringy-1.216]#

[root@redhat6 libnet-1.0703]# perl Makefile.PL
Checking for Socket...ok
Checking for IO::Socket...ok
Writing Makefile for Net

[root@redhat6 libnet-1.0703]# make
mkdir blib
mkdir blib/lib
mkdir blib/arch
mkdir blib/arch/auto
mkdir blib/arch/auto/Net
mkdir blib/lib/auto
mkdir blib/lib/auto/Net
mkdir blib/man3
cp Net/DummyInetd.pm blib/lib/Net/DummyInetd.pm
cp Net/NNTP.pm blib/lib/Net/NNTP.pm
cp Net/FTP/dataconn.pm blib/lib/Net/FTP/dataconn.pm
cp Net/SNPP.pm blib/lib/Net/SNPP.pm
cp Net/FTP/I.pm blib/lib/Net/FTP/I.pm
cp Net/POP3.pm blib/lib/Net/POP3.pm
cp Net/SMTP.pm blib/lib/Net/SMTP.pm
cp Net/FTP/L.pm blib/lib/Net/FTP/L.pm
cp Net/FTP.pm blib/lib/Net/FTP.pm
cp Net/Time.pm blib/lib/Net/Time.pm
cp Net/Cmd.pm blib/lib/Net/Cmd.pm
cp Net/Config.pm blib/lib/Net/Config.pm
cp Net/PH.pm blib/lib/Net/PH.pm
cp Net/Domain.pm blib/lib/Net/Domain.pm
cp Net/FTP/A.pm blib/lib/Net/FTP/A.pm
cp libnet.cfg blib/lib/Net/libnet.cfg
cp Net/Netrc.pm blib/lib/Net/Netrc.pm
cp Net/libnetFAQ.pod blib/lib/Net/libnetFAQ.pod
cp Net/FTP/E.pm blib/lib/Net/FTP/E.pm
Manifying blib/man3/Net::Time.3
Manifying blib/man3/Net::PH.3
Manifying blib/man3/Net::Domain.3
Manifying blib/man3/Net::NNTP.3
Manifying blib/man3/Net::DummyInetd.3
Manifying blib/man3/Net::SNPP.3
Manifying blib/man3/Net::FTP.3
Manifying blib/man3/Net::POP3.3
Manifying blib/man3/Net::libnetFAQ.3
Manifying blib/man3/Net::Netrc.3
Manifying blib/man3/Net::SMTP.3
Manifying blib/man3/Net::Cmd.3

[root@redhat6 libnet-1.0703]# make test
PERL_DL_NONLAZY=1 /usr/bin/perl -Iblib/arch -Iblib/lib -I/usr/lib/perl5/5.00503/
i386-linux -I/usr/lib/perl5/5.00503 -e 'use Test::Harness qw(&runtests $verbose)
; $verbose=0; runtests @ARGV;' t/*.t
t/ftp...............skipping test on this platform
t/hostname..........ok
t/nntp..............skipping test on this platform
t/ph................skipping test on this platform
t/require...........ok
t/smtp..............skipping test on this platform
All tests successful, 4 tests skipped.
Files=6,  Tests=12, 14 wallclock secs (12.59 cusr +  0.91 csys = 13.50 CPU)

[root@redhat6 libnet-1.0703]# make install
Installing /usr/lib/perl5/site_perl/5.005/Net/DummyInetd.pm
Installing /usr/lib/perl5/site_perl/5.005/Net/NNTP.pm
Installing /usr/lib/perl5/site_perl/5.005/Net/FTP/dataconn.pm
Installing /usr/lib/perl5/site_perl/5.005/Net/FTP/I.pm
Installing /usr/lib/perl5/site_perl/5.005/Net/FTP/L.pm
Installing /usr/lib/perl5/site_perl/5.005/Net/FTP/A.pm
Installing /usr/lib/perl5/site_perl/5.005/Net/FTP/E.pm
Installing /usr/lib/perl5/site_perl/5.005/Net/SNPP.pm
Installing /usr/lib/perl5/site_perl/5.005/Net/POP3.pm
Installing /usr/lib/perl5/site_perl/5.005/Net/SMTP.pm
Installing /usr/lib/perl5/site_perl/5.005/Net/FTP.pm
Installing /usr/lib/perl5/site_perl/5.005/Net/Time.pm
Installing /usr/lib/perl5/site_perl/5.005/Net/Cmd.pm
Installing /usr/lib/perl5/site_perl/5.005/Net/Config.pm
Installing /usr/lib/perl5/site_perl/5.005/Net/PH.pm
Installing /usr/lib/perl5/site_perl/5.005/Net/Domain.pm
Installing /usr/lib/perl5/site_perl/5.005/Net/libnet.cfg
Installing /usr/lib/perl5/site_perl/5.005/Net/Netrc.pm
Installing /usr/lib/perl5/site_perl/5.005/Net/libnetFAQ.pod
Installing /usr/lib/perl5/man/man3/Net::Time.3
Installing /usr/lib/perl5/man/man3/Net::PH.3
Installing /usr/lib/perl5/man/man3/Net::Domain.3
Installing /usr/lib/perl5/man/man3/Net::NNTP.3
Installing /usr/lib/perl5/man/man3/Net::DummyInetd.3
Installing /usr/lib/perl5/man/man3/Net::SNPP.3
Installing /usr/lib/perl5/man/man3/Net::FTP.3
Installing /usr/lib/perl5/man/man3/Net::POP3.3
Installing /usr/lib/perl5/man/man3/Net::libnetFAQ.3
Installing /usr/lib/perl5/man/man3/Net::Netrc.3
Installing /usr/lib/perl5/man/man3/Net::SMTP.3
Installing /usr/lib/perl5/man/man3/Net::Cmd.3
Writing /usr/lib/perl5/site_perl/5.005/i386-linux/auto/Net/.packlist
Appending installation info to /usr/lib/perl5/5.00503/i386-linux/perllocal.pod
[root@redhat6 libnet-1.0703]#

[root@redhat6 MIME-tools-5.410]# perl Makefile.PL
Warning: prerequisite Mail::Field 1.05 not found at (eval 1) line 220.
Warning: prerequisite Mail::Header 1.01 not found at (eval 1) line 220.
Warning: prerequisite Mail::Internet 1.0203 not found at (eval 1) line 220.
Writing Makefile for MIME-tools
[root@redhat6 MIME-tools-5.410]# make clean 後再度実行

[root@redhat6 MIME-tools-5.410]# perl Makefile.PL
Writing Makefile for MIME-tools
[root@redhat6 MIME-tools-5.410]#

[root@redhat6 MIME-tools-5.410]# make
Manifying blib/man3/MIME::Entity.3
Manifying blib/man3/MIME::Decoder::QuotedPrint.3
Manifying blib/man3/MIME::Field::ParamVal.3
Manifying blib/man3/MIME::Decoder::Gzip64.3
Manifying blib/man3/MIME::Field::ContType.3
Manifying blib/man3/MIME::Decoder::Base64.3
Manifying blib/man3/MIME::Decoder::Binary.3
Manifying blib/man3/MIME::Parser.3
Manifying blib/man3/MIME::Parser::Filer.3
Manifying blib/man3/MIME::Parser::Results.3
Manifying blib/man3/MIME::Body.3
Manifying blib/man3/MIME::Parser::Reader.3
Manifying blib/man3/MIME::Decoder::UU.3
Manifying blib/man3/MIME::Words.3
Manifying blib/man3/MIME::Field::ConTraEnc.3
Manifying blib/man3/MIME::Tools.3
Manifying blib/man3/MIME::Head.3
Manifying blib/man3/MIME::WordDecoder.3
Manifying blib/man3/MIME::Decoder::NBit.3
Manifying blib/man3/MIME::Decoder.3
Manifying blib/man3/MIME::Field::ContDisp.3
[root@redhat6 MIME-tools-5.410]#

root@redhat6 MIME-tools-5.410]# make test
PERL_DL_NONLAZY=1 /usr/bin/perl -Iblib/arch -Iblib/lib -I/usr/lib/perl5/5.00503/
i386-linux -I/usr/lib/perl5/5.00503 -e 'use Test::Harness qw(&runtests $verbose)
; $verbose=0; runtests @ARGV;' t/*.t
t/Body..............ok
t/Decoder...........ok
t/Entity............ok
t/Gauntlet..........ok
t/Head..............ok
t/Misc..............ok
t/Parser............ok
t/Ref...............ok
t/WordDecoder.......ok
t/Words.............ok
All tests successful.
Files=10,  Tests=223, 59 wallclock secs (55.79 cusr +  2.61 csys = 58.40 CPU)

[root@redhat6 MIME-tools-5.410]#make install
Installing /usr/lib/perl5/man/man3/MIME::Words.3
Installing /usr/lib/perl5/man/man3/MIME::Field::ConTraEnc.3
Installing /usr/lib/perl5/man/man3/MIME::Tools.3
Installing /usr/lib/perl5/man/man3/MIME::Head.3
Installing /usr/lib/perl5/man/man3/MIME::WordDecoder.3
Installing /usr/lib/perl5/man/man3/MIME::Decoder::NBit.3
Installing /usr/lib/perl5/man/man3/MIME::Decoder.3
Installing /usr/lib/perl5/man/man3/MIME::Field::ContDisp.3
Writing /usr/lib/perl5/site_perl/5.005/i386-linux/auto/MIME-tools/.packlist
Appending installation info to /usr/lib/perl5/5.00503/i386-linux/perllocal.pod
[root@redhat6 MIME-tools-5.410]#

--------------------------------------必要無し
[root@redhat6 /tmp]# cd Mail-Sender-0.7.04
[root@redhat6 Mail-Sender-0.7.04]# perl Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for Mail::Sender
[root@redhat6 Mail-Sender-0.7.04]# make
mkdir blib
mkdir blib/lib
mkdir blib/lib/Mail
mkdir blib/arch
mkdir blib/arch/auto
mkdir blib/arch/auto/Mail
mkdir blib/arch/auto/Mail/Sender
mkdir blib/lib/auto
mkdir blib/lib/auto/Mail
mkdir blib/lib/auto/Mail/Sender
mkdir blib/man3
cp Sender.pm blib/lib/Mail/Sender.pm
Manifying blib/man3/Mail::Sender.3
/usr/bin/perl -Iblib/arch -Iblib/lib -I/usr/lib/perl5/5.00503/i386-linux -I/usr/
lib/perl5/5.00503 Config.PL Config



################# Default new object settings for Mail::Sender #################


Specify defaults for Mail::Sender? (y/N)

PostgreSQL7.03+PHP4に挑戦

01/1/15　最新の環境を導入しました。ApacheがDSOモ－ドでコンパイル出来るようになり、かなり導入が簡単になりました。PHP4では、セッション管理、スピ－ドが向上している様子なので、これからの開発が楽しみです。

namazu2.0に挑戦

01/1/16 久しぶりに、全文検索(namazu)へ挑戦。前回は、1.3でした、最近はPHPからも検索が出来る様子。

root@redhat6 libutil]# rpm -qa | grep namazu
[root@redhat6 libutil]# rpm -qa | grep kakasi
[root@redhat6 libutil]# cd /tmp
[[root@redhat6 /tmp]# mount /mnt/cdrom
[root@redhat6 /tmp]# cd /mnt/cdrom/others/RPMS/i386
[root@redhat6 i386]# rpm -ivh kakasi*
kakasi                      ##################################################
kakasi-devel                ##################################################
kakasi-dict                 ##################################################

[root@redhat6 i386]# rpm -ivh namazu*
error: failed dependencies:
        perl-File-MMagic >= 0.20 is needed by namazu-2.0.4-1
        perl-NKF >= 1.70 is needed by namazu-2.0.4-1
        perl-Text-Kakasi >= 1.00 is needed by namazu-2.0.4-1
        perl-File-MMagic >= 0.20 is needed by namazu-2.0.4-1
        perl-NKF >= 1.70 is needed by namazu-2.0.4-1
        perl-Text-Kakasi >= 1.00 is needed by namazu-2.0.4-1
[root@redhat6 i386]# rpm -ivh perl-File-MMagic
error: cannot open file perl-File-MMagic
[root@redhat6 i386]# rpm -ivh perl-File-MMagic*
perl-File-MMagic            ##################################################
[root@redhat6 i386]# rpm -ivh perl-NKF*
perl-NKF                    ##################################################
[root@redhat6 i386]# rpm -ivh perl-Text-Kakasi*
perl-Text-Kakasi            ##################################################

[root@redhat6 i386]# rpm -ivh namazu*
namazu                      ##################################################
namazu                      ##################################################
[root@redhat6 i386]#/etc/namazu/namazurc 変更
環境に合わせて、namazu.cgi を移動、表示のカスタマイズが必要な場合は、templateデイレクトリを新規で作成し、MMZ.body.ja等の各種ファイルをtemplateに複写して、変更
併せて、namazurcも変更。以前は、複数インデックスの検索が難しかったのですが、今回からかなり簡単。
やはり一度でも導入の経験があると違いますね。

うまく動作しました。　

Cocoon1.7に挑戦

01/1/17 昨年末からやりたかったApacheでのXML処理。Tomcat3.1との組み合わせ。　

[root@redhat6 local]#tar zxvf Cocoon-1.7.4.tar.gz
cocoon-1.7.4/xdocs/cocoon2.xml
cocoon-1.7.4/xdocs/faq.xml
cocoon-1.7.4/xdocs/installing.xml
cocoon-1.7.4/xdocs/dynamic.xml
cocoon-1.7.4/xdocs/dcpprocessor.xml
cocoon-1.7.4/xdocs/WD-xsp.xml
cocoon-1.7.4/xdocs/livesites.xml
cocoon-1.7.4/todo.xml
cocoon-1.7.4/changes.xml
cocoon-1.7.4/README
cocoon-1.7.4/build.sh
cocoon-1.7.4/index.html
cocoon-1.7.4/build.bat
cocoon-1.7.4/build.xml
cocoon-1.7.4/LICENSE
[root@redhat6 local]# cd cocoon-1.7.4
[root@redhat6 cocoon-1.7.4]# cp lib/*.jar /usr/local/tomcat/lib
cp: overwrite `/usr/local/tomcat/lib/ant.jar'? n
[root@redhat6 cocoon-1.7.4]# cp bin/cocoon.jar /usr/local/tomcat/lib

[root@redhat6 tomcat]# cd webapps
[root@redhat6 webapps]# ls
ROOT  ROOT.war  admin  admin.war  examples  examples.war  test  test.war  yotei
[root@redhat6 webapps]# mkdir cocoon
[root@redhat6 webapps]# cd cocoon
[root@redhat6 cocoon]# mkdir WEB-INF
[root@redhat6 cocoon]# cd WEB-INF
[root@redhat6 WEB-INF]# cp /usr/local/cocoon-1.7.4/src/WEB-INF/web.xml .
[root@redhat6 WEB-INF]#

[root@redhat6 WEB-INF]# cp /usr/local/cocoon-1.7.4/conf/cocoon.properties .
[root@redhat6 WEB-INF]# ls
cocoon.properties  web.xml
[root@redhat6 servlets]# /usr/local/tomcat/bin/tomcat.sh stop
Guessing TOMCAT_HOME from tomcat.sh to /usr/local/tomcat/bin/..
Setting TOMCAT_HOME to /usr/local/tomcat/bin/..
which: no java in (/usr/bin:/bin:/usr/local/bin:/usr/X11R6/bin:/home/postgres/bin:/usr/local/pgsql/bin)
Cannot find JAVA. Please set your PATH.
[root@redhat6 servlets]# export JAVA_HOME=/usr/local/jdk1.2.2
[root@redhat6 servlets]# /usr/local/tomcat/bin/tomcat.sh stop
Guessing TOMCAT_HOME from tomcat.sh to /usr/local/tomcat/bin/..
Setting TOMCAT_HOME to /usr/local/tomcat/bin/..
Using classpath: .:/usr/local/tomcat/bin/../lib/ant.jar:/usr/local/tomcat/bin/..
/lib/cocoon.jar:/usr/local/tomcat/bin/../lib/fop_0_12_1.jar:/usr/local/tomcat/bin/../lib/jasper.jar:/usr/local/tomcat/bin/../lib/servlet.jar:/usr/local/tomcat/b
in/../lib/servlet_2_2.jar:/usr/local/tomcat/bin/../lib/stylebook-1.0-b2.jar:/usr/local/tomcat/bin/../lib/test:/usr/local/tomcat/bin/../lib/webserver.jar:/usr/lo
cal/tomcat/bin/../lib/xalan_1_0_1.jar:/usr/local/tomcat/bin/../lib/xerces_1_0_3.
jar:/usr/local/tomcat/bin/../lib/xml.jar:/usr/local/jdk1.2.2/lib/tools.jar
Stop tomcat

[root@redhat6 local]# cd /usr/local/tomcat/logs
Context log: path="/examples" Adding context path="/examples"  docBase="webapps/examples"
Context log: path="/examples" Adding context path="/examples"  docBase="webapps/examples"
Context log: path="" Adding context path=""  docBase="webapps/ROOT"
Context log: path="/test" Adding context path="/test"  docBase="webapps/test"
Context log: path="/yotei" Adding context path="/yotei"  docBase="webapps/yotei"
Context log: path="/cocoon" Adding context path="/cocoon"  docBase="webapps/cocoon"
Starting tomcat install="/usr/local/tomcat/bin/.." home="/usr/local/tomcat" clas
sPath=".:/usr/local/tomcat/bin/../lib/ant.jar:/usr/local/tomcat/bin/../lib/cocoo
n.jar:/usr/local/tomcat/bin/../lib/fop_0_12_1.jar:/usr/local/tomcat/bin/../lib/j
asper.jar:/usr/local/tomcat/bin/../lib/servlet.jar:/usr/local/tomcat/bin/../lib/
servlet_2_2.jar:/usr/local/tomcat/bin/../lib/stylebook-1.0-b2.jar:/usr/local/tom
cat/bin/../lib/test:/usr/local/tomcat/bin/../lib/webserver.jar:/usr/local/tomcat
/bin/../lib/xalan_1_0_1.jar:/usr/local/tomcat/bin/../lib/xerces_1_0_3.jar:/usr/l
ocal/tomcat/bin/../lib/xml.jar:/usr/local/jdk1.2.2/lib/tools.jar"
Context log: path="/admin" Automatic context load docBase="/usr/local/tomcat/webapps/admin"
Context log: path="/admin" Adding context path="/admin"  docBase="/usr/local/tomcat/webapps/admin"
Context log: path="/yotei" File not found /usr/local/tomcat/webapps/yotei/WEB-INF/web.xml, using only defaults
Starting endpoint port="8080" handler="org.apache.tomcat.service.http.HttpConnectionHandler"
Starting endpoint port="8007" handler="org.apache.tomcat.service.connector.Ajp12
ConnectionHandler"

それでは、サンプルにアクセスしてみましょう。
---------------------------------------------------
Cocoon 1.7.4

                                     Unable to open resource: /usr/local/tomcat/webapps/cocoon/WEB-INF/cocoon.properties

            java.io.FileNotFoundException: /usr/local/tomcat/webapps/cocoon/usr/local/tomcat/webapps/cocoon/WEB-INF/cocoon.properties (No such file or directory)
                    at java.io.FileInputStream.open(Native Method)
                    at java.io.FileInputStream.(FileInputStream.java:64)
                    at sun.net.www.protocol.file.FileURLConnection.connect(FileURLConnection.java:68)
                    at sun.net.www.protocol.file.FileURLConnection.getInputStream(FileURLConnection.java:132)
                    at org.apache.cocoon.Cocoon.init(Cocoon.java:123)
                    at org.apache.tomcat.core.ServletWrapper.initServlet(ServletWrapper.java:315)
                    at org.apache.tomcat.core.ServletWrapper.handleRequest(ServletWrapper.java:445)
                    at org.apache.tomcat.core.ContextManager.service(ContextManager.java:559)
                    at org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(HttpConnectionHandler.java:160)
                    at org.apache.tomcat.service.TcpConnectionThread.run(SimpleTcpEndpoint.java:338)
                    at java.lang.Thread.run(Thread.java:475)
あれあれ、エラ－になってしまいました。

web.xmlのパスが違っていました。無事、動作するようになりました。

milacle Linuxに挑戦

01/2/

Linux+ASP関連のリンク集

AT 互換機とLinux のペ－ジ・・・小松さんのAT 互換機とLinux 。

XML Cocoon のペ－ジ・・・XML Cocoon 。

SH* Linux・・・Linux関係。

ritsuo@mxy.mesh.ne.jp

☆ Linux奮闘記 (16) 新しい世紀の始まり? '2001/1- ☆

☆ Linux奮闘記 (16)　新しい世紀の始まり?　'2001/1- ☆