Debian Linux

☆ Linux奮闘記 (24)　デスクトップ環境　'2001/11- ☆

長い間サ－バ環境に特化してきたのですが、先日来、デスクトップ環境での運用をしており、以前とは比べようもなく環境が良くなったのを肌で感じています。turboのworkstation 7 などは、個人的にもすばらしいと思っています。
話は変わりますが、勤めている会社が今月末決算です。やはり当社も不景気の風を受け、前期と比べて減益と不本意な結果に終わりました。我々が所属しているグル－プでも、伸び悩んでいます。これから生き残る道は、今まで以上に「業種特化」、「特化技術の絞り込み」、「ロ－コストでのソフト作り」、この３点に資源を集中して進むしかないのではないかと思っています。

Sophos Anti-Virus install

01/10/14 Linux版　ウイルスソフト導入。

[root@redhat6 /tmp]# tar xvf linux_intel_libc6_tar
sav-install/
sav-install/vdl-3.50.dat
sav-install/install.sh
sav-install/Readunix.txt
sav-install/Install.txt
sav-install/icheckd.1
sav-install/icheckd.conf.5
sav-install/sweep.1
sav-install/icheckd
sav-install/libsavi.so.2.2.03.079
sav-install/sweep
[root@redhat6 /tmp]# /usr/sbin/groupadd sweep
[root@redhat6 /tmp]# /usr/sbin/useradd sweep -g sweep -s /sbin/false
[root@redhat6 /tmp]# cd sav-install

root@redhat6 sav-install]# ./install.sh -ni
Sophos Anti-Virus installation utility [Linux/Intel]
Copyright (c) 1998,2001 Sophos Plc, Oxford, England


[root@redhat6 sav-install]# sweep -v
SWEEP virus detection utility
Copyright (c) 1989,2001 Sophos Plc, www.sophos.com

System time 19:03:39, System date 14 October 2001

Product version           : 3.50
Engine version            : 2.6
User interface version    : 2.03.079
Platform                  : Linux/Intel
Released                  : 01 October 2001
Total viruses (with IDEs) : 68111

[root@redhat6 sav-install]# sweep -all /tmp
SWEEP virus detection utility
Version 3.50, October 2001 [Linux/Intel]
Includes detection for 68111 viruses, trojans and worms
Copyright (c) 1989,2001 Sophos Plc, www.sophos.com

System time 19:04:58, System date 24 October 2001
Command line qualifiers are: -all

Quick Sweeping


965 files swept in 58 seconds.
No viruses were discovered.
End of Sweep.
[root@redhat6 sav-install]#

xpgbench install

orca@ishida:/home/ftp/pub/xpgbench-1.1$ ls
Makefile.in  README.jis  configure.in  pgbench_config.h.in     progressbar.c
README       configure   pgbench.c     postgresql_pwr_blu.xpm  xpgbench.h
orca@ishida:/home/ftp/pub/xpgbench-1.1$ ./configure
creating cache ./config.cache
checking for main in -lcrypt... yes
checking for main in -lsocket... no
checking for main in -lnsl... yes
checking for RLIMIT_NOFILE... yes
checking for gtk-config... gtk-config
updating cache ./config.cache
creating ./config.status
creating Makefile
creating pgbench_config.h
orca@ishida:/home/ftp/pub/xpgbench-1.1$make

RedHat7.1 install

2001/10/26 Red7.1 のインスト－ル、やはりRed系は簡単だ、機械のスペックも良いので４０分程度で、GNOMEワ－クステイションが完成。telnet ftpがやりたい場合は、/etc/xinetd.d/wu-ftpd telnet の disable=yes --> no にすること。
Red Hat Linux release 7.1 (Seawolf) Kernel 2.4.2-2 on an i686 login: fujii Password: Last login: Fri Oct 26 15:43:52 from xxx.xxx.xxx.xxx [fujii@woody fujii]$

ORCA Report

2001/10/26 初期のバ－ジョンからどんどん進化しています。機械も当初　１CPU だったのですが、負荷が大きいため　２CPUにしました。予想以上に、DB処理は速くなり当面はこの状態で、試験運転をする予定です。
２CPU画像
リモ－トプリンタ－の環境も整備出来、本格的に使用が可能。

PPTP Client Install

2001/11/12

[root@redhat6 /tmp]# tar zxvf pptp-linux-1_0_3-1_tar.gz
pptp-linux-1.0.3-1/
pptp-linux-1.0.3-1/options.pptp
pptp-linux-1.0.3-1/pptp-command
pptp-linux-1.0.3-1/pptp-linux-1.0.3.tar.gz
pptp-linux-1.0.3-1/pptp-linux.spec

[root@redhat6 pptp-linux-1.0.3-1]# tar zxvf pptp-linux-1.0.3.tar.gz
pptp-linux-1.0.3/
pptp-linux-1.0.3/AUTHORS
pptp-linux-1.0.3/COPYING
pptp-linux-1.0.3/INSTALL
pptp-linux-1.0.3/Makefile
pptp-linux-1.0.3/NEWS
pptp-linux-1.0.3/README
pptp-linux-1.0.3/TODO
pptp-linux-1.0.3/USING
pptp-linux-1.0.3/dirutil.c
pptp-linux-1.0.3/dirutil.h
pptp-linux-1.0.3/inststr.c
pptp-linux-1.0.3/inststr.h
pptp-linux-1.0.3/ppp_fcs.c
pptp-linux-1.0.3/ppp_fcs.h
pptp-linux-1.0.3/pptp.c
pptp-linux-1.0.3/pptp_callmgr.c
pptp-linux-1.0.3/pptp_callmgr.h
pptp-linux-1.0.3/pptp_ctrl.c
pptp-linux-1.0.3/pptp_ctrl.h
pptp-linux-1.0.3/pptp_gre.c
pptp-linux-1.0.3/pptp_gre.h
pptp-linux-1.0.3/pptp_msg.h
pptp-linux-1.0.3/pptp_options.h
pptp-linux-1.0.3/pty.c
pptp-linux-1.0.3/pty.h
pptp-linux-1.0.3/util.c
pptp-linux-1.0.3/util.h
pptp-linux-1.0.3/vector.c
pptp-linux-1.0.3/vector.h
pptp-linux-1.0.3/vector_test.c
pptp-linux-1.0.3/version.c
pptp-linux-1.0.3/version.h
pptp-linux-1.0.3/Documentation/
pptp-linux-1.0.3/Documentation/DESIGN.CALLMGR
pptp-linux-1.0.3/Documentation/DESIGN.PPTP
pptp-linux-1.0.3/Documentation/PORTING
pptp-linux-1.0.3/Reference/
pptp-linux-1.0.3/Reference/README
pptp-linux-1.0.3/Reference/ms-chap.txt
pptp-linux-1.0.3/Reference/pptp-draft.txt
pptp-linux-1.0.3/Reference/rfc1661.txt
pptp-linux-1.0.3/Reference/rfc1662.txt
pptp-linux-1.0.3/Reference/rfc1701.txt
pptp-linux-1.0.3/Reference/rfc1702.txt
pptp-linux-1.0.3/Reference/rfc1990.txt
pptp-linux-1.0.3/Reference/rfc791.txt
pptp-linux-1.0.3/Reference/rfc793.txt
pptp-linux-1.0.3/debian/
pptp-linux-1.0.3/debian/README.Debian
pptp-linux-1.0.3/debian/README.Reference
pptp-linux-1.0.3/debian/alcatel.dpatch
pptp-linux-1.0.3/debian/changelog
pptp-linux-1.0.3/debian/control
pptp-linux-1.0.3/debian/copyright
pptp-linux-1.0.3/debian/packages
pptp-linux-1.0.3/debian/pptp.8
pptp-linux-1.0.3/debian/rules
pptp-linux-1.0.3/debian/thomas.dpatch
pptp-linux-1.0.3/debian/yada

[root@redhat6 pptp-linux-1.0.3-1]# make
gcc -Wall -O1 '-DPPTP_LINUX_VERSION="1.0.3"' -g  -DPROGRAM_NAME=\"pptp\" '-DPPPD_BINARY="/usr/sbin/pppd"'   -c pptp.c -o pptp.o
pptp.c: In function `main':
pptp.c:64: warning: argument `argc' might be clobbered by `longjmp' or `vfork'
pptp.c:64: warning: argument `argv' might be clobbered by `longjmp' or `vfork'
pptp_callmgr.c: In function `callmgr_main':
In file included from pptp.c:306:
pptp_callmgr.c:114: warning: variable `first' might be clobbered by `longjmp' or `vfork'
pptp_callmgr.c:117: warning: variable `phonenr' might be clobbered by `longjmp'
or `vfork'
gcc -Wall -O1 '-DPPTP_LINUX_VERSION="1.0.3"' -g  -DPROGRAM_NAME=\"pptp\" '-DPPPD_BINARY="/usr/sbin/pppd"'   -c pptp_gre.c -o pptp_gre.o
gcc -Wall -O1 '-DPPTP_LINUX_VERSION="1.0.3"' -g  -DPROGRAM_NAME=\"pptp\" '-DPPPD_BINARY="/usr/sbin/pppd"'   -c ppp_fcs.c -o ppp_fcs.o
gcc -Wall -O1 '-DPPTP_LINUX_VERSION="1.0.3"' -g  -DPROGRAM_NAME=\"pptp\" '-DPPPD_BINARY="/usr/sbin/pppd"'   -c pty.c -o pty.o
gcc -Wall -O1 '-DPPTP_LINUX_VERSION="1.0.3"' -g  -DPROGRAM_NAME=\"pptp\" '-DPPPD_BINARY="/usr/sbin/pppd"'   -c pptp_ctrl.c -o pptp_ctrl.o
pptp_ctrl.c: In function `pptp_dispatch_ctrl_packet':
pptp_ctrl.c:557: warning: unused variable `packet'
pptp_ctrl.c:575: warning: unused variable `packet'
gcc -Wall -O1 '-DPPTP_LINUX_VERSION="1.0.3"' -g  -DPROGRAM_NAME=\"pptp\" '-DPPPD_BINARY="/usr/sbin/pppd"'   -c dirutil.c -o dirutil.o
gcc -Wall -O1 '-DPPTP_LINUX_VERSION="1.0.3"' -g  -DPROGRAM_NAME=\"pptp\" '-DPPPD_BINARY="/usr/sbin/pppd"'   -c vector.c -o vector.o
gcc -Wall -O1 '-DPPTP_LINUX_VERSION="1.0.3"' -g  -DPROGRAM_NAME=\"pptp\" '-DPPPD_BINARY="/usr/sbin/pppd"'   -c inststr.c -o inststr.o
gcc -Wall -O1 '-DPPTP_LINUX_VERSION="1.0.3"' -g  -DPROGRAM_NAME=\"pptp\" '-DPPPD_BINARY="/usr/sbin/pppd"'   -c util.c -o util.o
gcc -Wall -O1 '-DPPTP_LINUX_VERSION="1.0.3"' -g  -DPROGRAM_NAME=\"pptp\" '-DPPPD_BINARY="/usr/sbin/pppd"'   -c version.c -o version.o
gcc -Wall -o pptp pptp.o pptp_gre.o ppp_fcs.o pty.o pptp_ctrl.o dirutil.o vector.o inststr.o util.o version.o -lutil
gcc -Wall -O1 '-DPPTP_LINUX_VERSION="1.0.3"' -g  -DPROGRAM_NAME=\"pptp\" '-DPPPD_BINARY="/usr/sbin/pppd"'   -c pptp_callmgr.c -o pptp_callmgr.o
pptp_callmgr.c: In function `main':
pptp_callmgr.c:114: warning: variable `first' might be clobbered by `longjmp' or `vfork'
pptp_callmgr.c:117: warning: variable `phonenr' might be clobbered by `longjmp'
or `vfork'
gcc -Wall -o pptp_callmgr -DPROGRAM_NAME=pptp_callmgr pptp_callmgr.o pptp_ctrl.o dirutil.o util.o vector.o version.o -lutil
[root@redhat6 pptp-linux-1.0.3]# cd /etc/ppp
[root@redhat6 ppp]# ls
chap-secrets  ip-down  ip-up  options  pap-secrets  peers
[root@redhat6 ppp]#

VPN CIPE Install

2001/11/13

[root@redhat6 /tmp]# cd cipe-1.5.2
[root@redhat6 cipe-1.5.2]# ./configure
loading cache ./config.cache
checking for gcc... gcc
checking whether the C compiler (gcc  ) works... yes
checking whether the C compiler (gcc  ) is a cross-compiler... no
checking whether we are using GNU C... yes
checking whether gcc accepts -g... yes
checking how to run the C preprocessor... gcc -E
checking for texinfo... no
checking for tex... tex
checking for makeinfo... makeinfo
checking for gmake... gmake
checking for kernel include tree... /usr/src/linux-2.2.12/include
checking for kernel compile parameters... configure: warning: no Makefile - using default flags
checking for architecture... i386
checking for kernel version... 2.2.12-32
configure: warning: could not find kernel compiler version
checking for SMP... no
checking whether gcc needs -fno-strict-aliasing... yes
checking for versioned symbols... yes
checking for assembler parts... bf-i386.o
checking for mlock... yes
checking for mlockall... yes
checking for OpenSSL... includes /usr/local/ssl/include, libs /usr/local/ssl/lib
checking for openssl... /usr/local/ssl/bin/openssl
checking OpenSSL version... 0.9.6b
updating cache ./config.cache
creating ./config.status
creating Makefile
creating 2.2.12-32-i386-cb/Makefile
creating lib/Makefile
creating pkcipe/Makefile
creating pkcipe/rsa-keygen
creating 2.2.12-32-i386-cb/config.h
creating pkcipe/config.h
[root@redhat6 cipe-1.5.2]# make
gmake -C pkcipe all
gmake[1]: Entering directory `/tmp/cipe-1.5.2/pkcipe'
gcc -I/usr/local/ssl/include  -I.. -I../lib -fno-strict-aliasing -Wall -Wstrict-prototypes -fomit-frame-pointer -fno-strength-reduce -g  -Wno-strict-prototypes
-DHAVE_CONFIG_H   -MD -c proto.c
gcc -I/usr/local/ssl/include  -I.. -I../lib -fno-strict-aliasing -Wall -Wstrict-prototypes -fomit-frame-pointer -fno-strength-reduce -g  -Wno-strict-prototypes
-DHAVE_CONFIG_H   -MD -c negotiate.c
gcc -I/usr/local/ssl/include  -I.. -I../lib -fno-strict-aliasing -Wall -Wstrict-prototypes -fomit-frame-pointer -fno-strength-reduce -g  -Wno-strict-prototypes
-DHAVE_CONFIG_H   -MD -c main.c
gcc -I/usr/local/ssl/include  -I.. -I../lib -fno-strict-aliasing -Wall -Wstrict-prototypes -fomit-frame-pointer -fno-strength-reduce -g  -Wno-strict-prototypes
-DHAVE_CONFIG_H   -MD -c packet.c
gcc -I/usr/local/ssl/include  -I.. -I../lib -fno-strict-aliasing -Wall -Wstrict-prototypes -fomit-frame-pointer -fno-strength-reduce -g  -Wno-strict-prototypes
-DHAVE_CONFIG_H   -MD -c lock.c
gcc -I/usr/local/ssl/include  -I.. -I../lib -fno-strict-aliasing -Wall -Wstrict-prototypes -fomit-frame-pointer -fno-strength-reduce -g  -Wno-strict-prototypes
-DHAVE_CONFIG_H   -MD -c p_sha1.c
gcc  -o pkcipe proto.o negotiate.o main.o packet.o lock.o p_sha1.o -L/usr/local/ssl/lib -lcrypto -ldl  -L../lib -lcipe
gmake[1]: Leaving directory `/tmp/cipe-1.5.2/pkcipe'

root@redhat6 cipe-1.5.2]# make install
gmake -C lib install
gmake[1]: Entering directory `/tmp/cipe-1.5.2/lib'
: Nothing to install here
gmake[1]: Leaving directory `/tmp/cipe-1.5.2/lib'
gmake -C 2.2.12-32-i386-cb install
gmake[1]: Entering directory `/tmp/cipe-1.5.2/2.2.12-32-i386-cb'
mkdir -p /lib/modules/2.2.12-32/misc /usr/local/sbin
install -m 644 cipcb.o /lib/modules/2.2.12-32/misc
install -m 755 ciped-cb /usr/local/sbin
depmod -a
gmake[1]: depmod: Command not found
gmake[1]: [install] Error 127 (ignored)
gmake[1]: Leaving directory `/tmp/cipe-1.5.2/2.2.12-32-i386-cb'
gmake -C pkcipe install
gmake[1]: Entering directory `/tmp/cipe-1.5.2/pkcipe'
mkdir -p /usr/local/bin /usr/local/sbin
install -m 755 rsa-keygen /usr/local/bin
install -m 755 pkcipe /usr/local/sbin
[ -d /etc/cipe/pk ] || mkdir -p /etc/cipe/pk
[ -d /var/run/cipe ] || mkdir -p /var/run/cipe
chmod 700 /etc/cipe /etc/cipe/pk /var/run/cipe
*** Generating new identity (host) key ***
warning, not much extra random data, consider using the -rand option
Generating RSA private key, 1024 bit long modulus
.................++++++...++++++e is 65537 (0x10001)
read RSA key
writing RSA key
Private key in /etc/cipe/identity.priv, Public key in /etc/cipe/identity
gmake[1]: Leaving directory `/tmp/cipe-1.5.2/pkcipe'
makeinfo --no-split cipe.texinfo
mkdir -p /usr/local/info
install -m 644 cipe.info /usr/local/info
[root@redhat6 cipe-1.5.2]#

Zebedee Install

2001/11/14

root@redhat7 /tmp]# ls
install.log  jd_sockV4  zebedee-2_2_1-0vl2_i386.rpm
[root@redhat7 /tmp]# rpm -ivh zebedee-2_2_1-0vl2_i386.rpm
Preparing...                ########################################### [100%]
   1:zebedee                ########################################### [100%]
[root@redhat7 /tmp]#

windows ---------- zebedee  install & test  
D:\Zebedee>zebedee -d 172.21.20.7
ZEBEDEE(21625/41349):  Listening on local port 1715
ZEBEDEE(21625/41349):  waiting for client connection

D:\Zebedee>zebedee 2121,10000-10010:172.21.20.7:2121,10000-10010
ZEBEDEE(21625/17177):  Listening on local port 2121
ZEBEDEE(21625/17177):  Listening on local port 10000
ZEBEDEE(21625/17177):  Listening on local port 10001
ZEBEDEE(21625/17177):  Listening on local port 10002
ZEBEDEE(21625/17177):  Listening on local port 10003
ZEBEDEE(21625/17177):  Listening on local port 10004
ZEBEDEE(21625/17177):  Listening on local port 10005
ZEBEDEE(21625/17177):  Listening on local port 10006
ZEBEDEE(21625/17177):  Listening on local port 10007
ZEBEDEE(21625/17177):  Listening on local port 10008
ZEBEDEE(21625/17177):  Listening on local port 10009
ZEBEDEE(21625/17177):  Listening on local port 10010

Vtun Install

2001/11/14

パケット圧縮
[root@redhat6 lzo-1.07]# ./configure
[root@redhat6 lzo-1.07]# make 
uninitialized -o testmini testmini.o minilzo.o
make[2]: Leaving directory `/tmp/lzo-1.07/minilzo'
make[2]: Entering directory `/tmp/lzo-1.07'
make[2]: Leaving directory `/tmp/lzo-1.07'
make[1]: Leaving directory `/tmp/lzo-1.07'

[root@redhat6 lzo-1.07]# make install
Making install in include
make[1]: Entering directory `/tmp/lzo-1.07/include'
make[2]: Entering directory `/tmp/lzo-1.07/include'
make[2]: Nothing to be done for `install-exec-am'.
/bin/sh ../acconfig/mkinstalldirs /usr/local/include
 /usr/bin/install -c -m 644 lzoconf.h /usr/local/include/lzoconf.h
 /usr/bin/install -c -m 644 lzoutil.h /usr/local/include/lzoutil.h
 /usr/bin/install -c -m 644 lzo16bit.h /usr/local/include/lzo16bit.h
 /usr/bin/install -c -m 644 lzo1.h /usr/local/include/lzo1.h
 /usr/bin/install -c -m 644 lzo1a.h /usr/local/include/lzo1a.h
 /usr/bin/install -c -m 644 lzo1b.h /usr/local/include/lzo1b.h
 /usr/bin/install -c -m 644 lzo1c.h /usr/local/include/lzo1c.h
 /usr/bin/install -c -m 644 lzo1f.h /usr/local/include/lzo1f.h
 /usr/bin/install -c -m 644 lzo1x.h /usr/local/include/lzo1x.h
 /usr/bin/install -c -m 644 lzo1y.h /usr/local/include/lzo1y.h
 /usr/bin/install -c -m 644 lzo1z.h /usr/local/include/lzo1z.h
 /usr/bin/install -c -m 644 lzo2a.h /usr/local/include/lzo2a.h
make[2]: Leaving directory `/tmp/lzo-1.07/include'
make[1]: Leaving directory `/tmp/lzo-1.07/include'
Making install in src
make[1]: Entering directory `/tmp/lzo-1.07/src'
make[2]: Entering directory `/tmp/lzo-1.07/src'
/bin/sh ../acconfig/mkinstalldirs /usr/local/lib
/bin/sh ../libtool  --mode=install /usr/bin/install -c liblzo.la /usr/local/lib/
liblzo.la
/usr/bin/install -c .libs/liblzo.lai /usr/local/lib/liblzo.la
/usr/bin/install -c .libs/liblzo.a /usr/local/lib/liblzo.a
ranlib /usr/local/lib/liblzo.a
chmod 644 /usr/local/lib/liblzo.a
PATH="$PATH:/sbin" ldconfig -n /usr/local/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /usr/local/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,--rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/tmp/lzo-1.07/src'
make[1]: Leaving directory `/tmp/lzo-1.07/src'
Making install in ltest
make[1]: Entering directory `/tmp/lzo-1.07/ltest'
make[2]: Entering directory `/tmp/lzo-1.07/ltest'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/tmp/lzo-1.07/ltest'
make[1]: Leaving directory `/tmp/lzo-1.07/ltest'
Making install in examples
make[1]: Entering directory `/tmp/lzo-1.07/examples'
make[2]: Entering directory `/tmp/lzo-1.07/examples'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/tmp/lzo-1.07/examples'
make[1]: Leaving directory `/tmp/lzo-1.07/examples'
Making install in tests
make[1]: Entering directory `/tmp/lzo-1.07/tests'
make[2]: Entering directory `/tmp/lzo-1.07/tests'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/tmp/lzo-1.07/tests'
make[1]: Leaving directory `/tmp/lzo-1.07/tests'
Making install in minilzo
make[1]: Entering directory `/tmp/lzo-1.07/minilzo'
make[2]: Entering directory `/tmp/lzo-1.07/minilzo'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/tmp/lzo-1.07/minilzo'
make[1]: Leaving directory `/tmp/lzo-1.07/minilzo'
make[1]: Entering directory `/tmp/lzo-1.07'
make[2]: Entering directory `/tmp/lzo-1.07'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/tmp/lzo-1.07'
make[1]: Leaving directory `/tmp/lzo-1.07'
[root@redhat6 lzo-1.07]#

[root@redhat7 vtun-2.5b1]# ./configue --disable-lzo
[root@redhat7 vtun-2.5b1]# make install
gcc -g -O2  -I/usr/include/openssl -DVTUN_CONFIG_FILE=\"/usr/local/etc/vtund.conf\" -DVTUN_PID_FILE=\"/usr/local/var/run/vtund.pid\" -DVTUN_STAT_DIR=\"/usr/local/var/log/vtund\" -DVTUN_LOCK_DIR=\"/usr/local/var/lock/vtund\" -c main.c
bison -y -d -b cfg_file cfg_file.y
gcc -g -O2  -I/usr/include/openssl -DVTUN_CONFIG_FILE=\"/usr/local/etc/vtund.conf\" -DVTUN_PID_FILE=\"/usr/local/var/run/vtund.pid\" -DVTUN_STAT_DIR=\"/usr/local/var/log/vtund\" -DVTUN_LOCK_DIR=\"/usr/local/var/lock/vtund\" -c cfg_file.tab.cflex -t  cfg_file.l > cfg_file.lex.c
gcc -g -O2  -I/usr/include/openssl -DVTUN_CONFIG_FILE=\"/usr/local/etc/vtund.conf\" -DVTUN_PID_FILE=\"/usr/local/var/run/vtund.pid\" -DVTUN_STAT_DIR=\"/usr/local/var/log/vtund\" -DVTUN_LOCK_DIR=\"/usr/local/var/lock/vtund\" -c cfg_file.lex.cgcc -g -O2  -I/usr/include/openssl -DVTUN_CONFIG_FILE=\"/usr/local/etc/vtund.conf\" -DVTUN_PID_FILE=\"/usr/local/var/run/vtund.pid\" -DVTUN_STAT_DIR=\"/usr/local/var/log/vtund\" -DVTUN_LOCK_DIR=\"/usr/local/var/lock/vtund\" -c server.c
gcc -g -O2  -I/usr/include/openssl -DVTUN_CONFIG_FILE=\"/usr/local/etc/vtund.conf\" -DVTUN_PID_FILE=\"/usr/local/var/run/vtund.pid\" -DVTUN_STAT_DIR=\"/usr/local/var/log/vtund\" -DVTUN_LOCK_DIR=\"/usr/local/var/lock/vtund\" -c client.c
gcc -g -O2  -I/usr/include/openssl -DVTUN_CONFIG_FILE=\"/usr/local/etc/vtund.conf\" -DVTUN_PID_FILE=\"/usr/local/var/run/vtund.pid\" -DVTUN_STAT_DIR=\"/usr/local/var/log/vtund\" -DVTUN_LOCK_DIR=\"/usr/local/var/lock/vtund\" -c lib.c
gcc -g -O2  -I/usr/include/openssl -DVTUN_CONFIG_FILE=\"/usr/local/etc/vtund.conf\" -DVTUN_PID_FILE=\"/usr/local/var/run/vtund.pid\" -DVTUN_STAT_DIR=\"/usr/local/var/log/vtund\" -DVTUN_LOCK_DIR=\"/usr/local/var/lock/vtund\" -c llist.c
gcc -g -O2  -I/usr/include/openssl -DVTUN_CONFIG_FILE=\"/usr/local/etc/vtund.conf\" -DVTUN_PID_FILE=\"/usr/local/var/run/vtund.pid\" -DVTUN_STAT_DIR=\"/usr/local/var/log/vtund\" -DVTUN_LOCK_DIR=\"/usr/local/var/lock/vtund\" -c auth.c
gcc -g -O2  -I/usr/include/openssl -DVTUN_CONFIG_FILE=\"/usr/local/etc/vtund.conf\" -DVTUN_PID_FILE=\"/usr/local/var/run/vtund.pid\" -DVTUN_STAT_DIR=\"/usr/local/var/log/vtund\" -DVTUN_LOCK_DIR=\"/usr/local/var/lock/vtund\" -c tunnel.c
gcc -g -O2  -I/usr/include/openssl -DVTUN_CONFIG_FILE=\"/usr/local/etc/vtund.conf\" -DVTUN_PID_FILE=\"/usr/local/var/run/vtund.pid\" -DVTUN_STAT_DIR=\"/usr/local/var/log/vtund\" -DVTUN_LOCK_DIR=\"/usr/local/var/lock/vtund\" -c lock.c
gcc -g -O2  -I/usr/include/openssl -DVTUN_CONFIG_FILE=\"/usr/local/etc/vtund.conf\" -DVTUN_PID_FILE=\"/usr/local/var/run/vtund.pid\" -DVTUN_STAT_DIR=\"/usr/local/var/log/vtund\" -DVTUN_LOCK_DIR=\"/usr/local/var/lock/vtund\" -c netlib.c
gcc -g -O2  -I/usr/include/openssl -DVTUN_CONFIG_FILE=\"/usr/local/etc/vtund.conf\" -DVTUN_PID_FILE=\"/usr/local/var/run/vtund.pid\" -DVTUN_STAT_DIR=\"/usr/local/var/log/vtund\" -DVTUN_LOCK_DIR=\"/usr/local/var/lock/vtund\" -c tun_dev.c
gcc -g -O2  -I/usr/include/openssl -DVTUN_CONFIG_FILE=\"/usr/local/etc/vtund.conf\" -DVTUN_PID_FILE=\"/usr/local/var/run/vtund.pid\" -DVTUN_STAT_DIR=\"/usr/local/var/log/vtund\" -DVTUN_LOCK_DIR=\"/usr/local/var/lock/vtund\" -c tap_dev.c
gcc -g -O2  -I/usr/include/openssl -DVTUN_CONFIG_FILE=\"/usr/local/etc/vtund.conf\" -DVTUN_PID_FILE=\"/usr/local/var/run/vtund.pid\" -DVTUN_STAT_DIR=\"/usr/local/var/log/vtund\" -DVTUN_LOCK_DIR=\"/usr/local/var/lock/vtund\" -c pty_dev.c
gcc -g -O2  -I/usr/include/openssl -DVTUN_CONFIG_FILE=\"/usr/local/etc/vtund.conf\" -DVTUN_PID_FILE=\"/usr/local/var/run/vtund.pid\" -DVTUN_STAT_DIR=\"/usr/local/var/log/vtund\" -DVTUN_LOCK_DIR=\"/usr/local/var/lock/vtund\" -c pipe_dev.c
gcc -g -O2  -I/usr/include/openssl -DVTUN_CONFIG_FILE=\"/usr/local/etc/vtund.conf\" -DVTUN_PID_FILE=\"/usr/local/var/run/vtund.pid\" -DVTUN_STAT_DIR=\"/usr/local/var/log/vtund\" -DVTUN_LOCK_DIR=\"/usr/local/var/lock/vtund\" -c tcp_proto.c
gcc -g -O2  -I/usr/include/openssl -DVTUN_CONFIG_FILE=\"/usr/local/etc/vtund.conf\" -DVTUN_PID_FILE=\"/usr/local/var/run/vtund.pid\" -DVTUN_STAT_DIR=\"/usr/local/var/log/vtund\" -DVTUN_LOCK_DIR=\"/usr/local/var/lock/vtund\" -c udp_proto.c
gcc -g -O2  -I/usr/include/openssl -DVTUN_CONFIG_FILE=\"/usr/local/etc/vtund.conf\" -DVTUN_PID_FILE=\"/usr/local/var/run/vtund.pid\" -DVTUN_STAT_DIR=\"/usr/local/var/log/vtund\" -DVTUN_LOCK_DIR=\"/usr/local/var/lock/vtund\" -c linkfd.c
gcc -g -O2  -I/usr/include/openssl -DVTUN_CONFIG_FILE=\"/usr/local/etc/vtund.conf\" -DVTUN_PID_FILE=\"/usr/local/var/run/vtund.pid\" -DVTUN_STAT_DIR=\"/usr/local/var/log/vtund\" -DVTUN_LOCK_DIR=\"/usr/local/var/lock/vtund\" -c lfd_shaper.c
gcc -g -O2  -I/usr/include/openssl -DVTUN_CONFIG_FILE=\"/usr/local/etc/vtund.conf\" -DVTUN_PID_FILE=\"/usr/local/var/run/vtund.pid\" -DVTUN_STAT_DIR=\"/usr/local/var/log/vtund\" -DVTUN_LOCK_DIR=\"/usr/local/var/lock/vtund\" -c lfd_zlib.c
gcc -g -O2  -I/usr/include/openssl -DVTUN_CONFIG_FILE=\"/usr/local/etc/vtund.conf\" -DVTUN_PID_FILE=\"/usr/local/var/run/vtund.pid\" -DVTUN_STAT_DIR=\"/usr/local/var/log/vtund\" -DVTUN_LOCK_DIR=\"/usr/local/var/lock/vtund\" -c lfd_lzo.c
gcc -g -O2  -I/usr/include/openssl -DVTUN_CONFIG_FILE=\"/usr/local/etc/vtund.conf\" -DVTUN_PID_FILE=\"/usr/local/var/run/vtund.pid\" -DVTUN_STAT_DIR=\"/usr/local/var/log/vtund\" -DVTUN_LOCK_DIR=\"/usr/local/var/lock/vtund\" -c lfd_encrypt.cgcc -g -O2  -I/usr/include/openssl -o vtund main.o cfg_file.tab.o cfg_file.lex.o server.o client.o lib.o llist.o auth.o tunnel.o lock.o netlib.o tun_dev.o tap_dev.o pty_dev.o pipe_dev.o tcp_proto.o udp_proto.o linkfd.o lfd_shaper.o lfd_zlib.o lfd_lzo.o lfd_encrypt.o   -lz -lcrypto
/usr/bin/install -c -d -m 755 -o root -g 0 /usr/local/etc
if [ ! -f /usr/local/etc/vtund.conf ]; then \
  /usr/bin/install -c -m 600 -o root -g 0 vtund.conf /usr/local/etc; \
fi/usr/bin/install -c -d -m 755 -o root -g 0 /usr/local/man/man8
/usr/bin/install -c -m 644 -o root -g 0 vtund.8 /usr/local/man/man8
/usr/bin/install -c -d -m 755 -o root -g 0 /usr/local/man/man5
/usr/bin/install -c -m 644 -o root -g 0 vtund.conf.5 /usr/local/man/man5
rm -f /usr/local/man/man8/vtun.8
ln -s vtund.8 /usr/local/man/man8/vtun.8
/usr/bin/install -c -d -m 755 -o root -g 0 /usr/local/var/run
/usr/bin/install -c -d -m 755 -o root -g 0 /usr/local/var/log/vtund
/usr/bin/install -c -d -m 755 -o root -g 0 /usr/local/var/lock/vtund
/usr/bin/install -c -d -m 755 -o root -g 0 /usr/local/sbin
/usr/bin/install -c -m 755 -o root -g 0 vtund /usr/local/sbin
[root@redhat7 vtun-2.5b1]#

Debian IPV6

2001/11/30

debian:/home/orca# /sbin/ifconfig
eth0      リンク方法:イーサーネット  ハードウェアアドレス 00:10:5A:82:00:E0
          inetアドレス:172.21.20.32 ブロードキャスト:172.21.255.255 マスク:255.2
55.0.0
          inet6アドレス: 2001:218:483::2/64 範囲:グローバル
          inet6アドレス: fe80::210:5aff:fe82:e0/10 範囲:リンク
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RXパケット:1215 エラー:0 損失:0 オーバラン:0 フレーム:0
          TXパケット:64 エラー:0 損失:0 オーバラン:0 キャリア:0
      衝突(Collisions):0 TXキュー長:100
          割り込み:5 ベースアドレス:0xbc00

lo        リンク方法:ローカルループバック
          inetアドレス:127.0.0.1マスク:255.0.0.0
          inet6アドレス: ::1/128 範囲:ホスト
          UP LOOPBACK RUNNING  MTU:3924  Metric:1
          RXパケット:53 エラー:0 損失:0 オーバラン:0 フレーム:0
          TXパケット:53 エラー:0 損失:0 オーバラン:0 キャリア:0
      衝突(Collisions):0 TXキュー長:0

debian:/home/orca# ping6 2001:218:700::2
PING 2001:218:700::2(ns.v6.orca.med.or.jp) 56 data bytes
From ::1: Destination unreachable: Address unreachable
From ::1: Destination unreachable: Address unreachable
From ::1: Destination unreachable: Address unreachable

--- 2001:218:700::2 ping6 statistics ---
6 packets transmitted, 0 packets received, 100% packet loss
debian:/home/orca# ping6 2001:218:0:1020::1000
PING 2001:218:0:1020::1000(ns6-tk01.ocn.ad.jp) 56 data bytes
From ::1: Destination unreachable: Address unreachable
From ::1: Destination unreachable: Address unreachable
From ::1: Destination unreachable: Address unreachable

--- 2001:218:0:1020::1000 ping6 statistics ---
6 packets transmitted, 0 packets received, 100% packet loss

debian:/home/orca# ping6 2001:218:483::2
PING 2001:218:483::2(2001:218:483::2) 56 data bytes
64 bytes from 2001:218:483::2: icmp_seq=0 time=0.1 ms
64 bytes from 2001:218:483::2: icmp_seq=1 time=0.0 ms
64 bytes from 2001:218:483::2: icmp_seq=2 time=0.0 ms
64 bytes from 2001:218:483::2: icmp_seq=3 time=0.0 ms
64 bytes from 2001:218:483::2: icmp_seq=4 time=0.0 ms

--- 2001:218:483::2 ping6 statistics ---
6 packets transmitted, 6 packets received, 0% packet loss
round-trip min/avg/max = 0.0/0.0/0.1 ms
debian:/home/orca#

Trend ServerProtect Install

2001/12/10 rpm -ivh sprotectlinux-1.0-1180.i386.rpm 導入は簡単、Webからの操作で各種設定変更、スキャンも実施出来てOKです。

[root@redhat7 init.d]# ./splx stop
Shutting down ServerProtect for Linux:
Shutting down splxhttpd:                                   [  OK  ]
Shutting down Comm_Center:                                 [  OK  ]
Shutting down Entity:                                      [  OK  ]
Shutting down LWDMServer:                                  [  OK  ]
Shutting down mrf:                                         [  OK  ]
Shutting down vsapiapp:                                    [  OK  ]
Unloading splx kernel module:                              [  OK  ]
ServerProtect for Linux has been stopped normally.
[root@redhat7 init.d]#

Linux+ASP関連のリンク集

gs ftp siteのペ－ジ・・・gs-5.10 gs-5.50。

gs 徹底入門・・・gs 徹底入門

SMP入門・・・SMP入門

Linux 徹底入門・・・Linux 徹底入門

Linuxアプリと Free Solaris のページ・・・ Linuxアプリと Free Solaris のページ

3com Driversのページ・・・ 3com Driver のページ

tex &printのページ・・・ tex & printのページ

CGI 248のページ・・・ CGI 248のページ

Debianのページ・・・ Debianのページ

potato-->woodyのページ・・・ potato-->woodyのページ

KAME projectのページ・・・ KAME projectのページ

FreeS/WANI VPNのページ・・・ FreeS/WANI VPNのページ

Debian のページ・・・ Debian のページ

VPN CIPEのページ・・・ VPN CIPEのページ

Vtun install memoのページ・・・ Vtun install memoのページ

Vtunのページ・・・ Vtun のページ

Zebedeeのページ・・・ Zebedee のページ

PPTPのページ・・・ PPTPのページ

RPM サ－チのページ・・・ RPM サ－チのページ

gs 入門・・・gs 入門

ritsuo@mxy.mesh.ne.jp

☆ Linux奮闘記 (24) デスクトップ環境 '2001/11- ☆

☆ Linux奮闘記 (24)　デスクトップ環境　'2001/11- ☆