Linux

☆ Linux奮闘記 (20)　輝く個人を目指して　'2001/5- ☆

毎日毎日、少し前の情報も消化しきれないうちに、新しい情報が洪水のように押し寄せて来て、パニツク状態です。大量の情報の中から、本質を見極める力も必要です。本質を掴まないで、色々な事をしても体力をなくすだけで、本質を見極めて全力を注ぐ、これがコレからは必要だと思います。それはさておき、２１世紀は間違いなく「輝く個人の時代」だと思うのですが、もちろん企業内でも、社会でも、とにかく「きらりと光る」、他にない物が必要だと思います。そうなれば、激しさが増す社会のなかで、間違いなく光り輝けるはずです。まあ、昔からいわれていたことかも知れませんが。

samba2.0.7ja の続き

01/5/1 sambaは少し前に導入したのですがうまく動かすことが出来なくてそのままになっていたのですが、今回、別件でSambaを使用したシステムの開発があり、実装テストをしています。
swatの起動、http://localhost:901/ ログイン名を聞いてくる
swatからの　/usr/local/samba/lib/smb.conf の修正。起動、停止もこちらから出来ます。

11326 ?        S      0:00 /usr/local/samba/bin/nmbd -D
11332 ?        S      0:00 /usr/local/samba/bin/smbd -D

smb.conf の中身　[例]
[global]
   socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192

   coding system = EUC
   client code page = 932
   browseable = yes
   status = yes
   read prediction = yes
   share modes = yes
   guest ok = yes
   guest account = nobody

map to guest = bad user  [だれでもアクセス化]

#============================ Share Definitions ==============================
[homes]
   comment = Home Directories
   browseable = yes
   writable = yes
[tmp]
   comment = Temporary file space
   path = /tmp
   read only = no
   public = yes
   writable = yes
   create mode = 777
   browseable = yes
   guest only = yes
   guest ok = yes

間違えて、/etc/smb.conf を一生懸命直していました。 smb.conf を色々変更して、やっと、希望通りのアクセス出来るようになりました、大成功です。
初めて導入される方は色々なトラブルに見舞われると思いますが、ネットワ－クからsamba serverが見れるようになれば、第一関門は突破、後は、各ホルダ－が見れるように、各種設定を行う、上記設定例は、パスワ－ド無しでだれでも/tmp と/homeにアクセス出来る設定です。
日本語のホルダ－も作れるので、Windowsとの連携もスム－ズですばらしいです。

PGPの続き

5/10　Linux側から公開カギを利用して、メ－ル送信テストをしています。

[root@redhat6 postgres]# pgpk -g
Cannot open configuration file /root/.pgp/pgp.cfg
Choose the type of your public key:
  1)  DSS/Diffie-Hellman - New algorithm for 5.0 (default)
  2)  RSA
Choose 1 or 2: 2

Pick your public/private keypair key size:
  1)   768 bits- Commercial grade, probably not currently breakable
  2)  1024 bits- High commercial grade, secure for many years
  3)  2048 bits- "Military" grade, secure for the forseeable future
Choose 1, 2 or 3, or enter desired number of bits
(768 - 2048): 1024


You need a user ID for your public key.  The desired form for this
user ID is your FULL name, followed by your E-mail address enclosed in
, if you have an E-mail address.  For example:
  Joe Smith 
If you violate this standard, you will lose much of the benefits of
PGP 5.0's keyserver and email integration.

Enter a user ID for your public key: Ritsuo Fujii 

Enter the validity period of your key in days from 0 - 999
0 is forever (and the default): 0

You need a pass phrase to protect your private key(s).
Your pass phrase can be any sentence or phrase and may have many
words, spaces, punctuation, or any other printable characters.
Enter pass phrase:
Enter again, for confirmation:
Enter pass phrase:
.*******  .*******
Keypair created successfully.

If you wish to send this new key to a server, enter the URL of the server,
below.  If not, enter nothing.

[root@redhat6 postgres]# pgpk -l 
Cannot open configuration file /root/.pgp/pgp.cfg
Type Bits KeyID      Created    Expires    Algorithm       Use
sec+ 1024 0xABF343B1 2001-05-10 ---------- RSA             Sign & Encrypt
uid  Ritsuo Fujii 

1 matching key found

[root@redhat6 .pgp]# pgpk -l  
Cannot open configuration file /root/.pgp/pgp.cfg
Type Bits KeyID      Created    Expires    Algorithm       Use
sec+ 1024 0xB30D0EED 2001-05-10 ---------- DSS             Sign & Encrypt
sub  1024 0x40DEBC23 2001-05-10 ---------- Diffie-Hellman
uid  ritsuo fujii 

1 matching key found
--------------------公開カギの他からの登録------------
[root@redhat6 /tmp]# pgpk -a ritsuofujii.asc
Cannot open configuration file /root/.pgp/pgp.cfg

Adding keys:

Key ring: 'ritsuofujii.asc'
Type Bits KeyID      Created    Expires    Algorithm       Use
pub  1024 0x46CF09C0 2001-02-24 ---------- DSS             Sign & Encrypt
sub  2048 0x5DED2935 2001-02-24 ---------- Diffie-Hellman
uid  ritsuo fujii 

1 matching key found

Add these keys to your keyring? [Y/n] y

Keys added successfully.
------------------それでは、実際にLinuxからメ－ルを送ってみます-----
[root@redhat6 bin]# pgpe -r ritsuo -af < pgp_test.txt | mail ritsuo@mxy.mesh.ne.jp
Cannot open configuration file /root/.pgp/pgp.cfg
No files specified.  Using stdin.

  1024 bits, Key ID 46CF09C0, Created 2001-02-24
   "ritsuo fujii "
WARNING: The above key is not trusted to belong to:
ritsuo fujii

問題なく、暗号化されたデ－タが送られて大成功。jpg画像も同様に暗号化して、添付ファイルとして自動転送が出来た。

BXS_1.0.11 サ－バ　install

[root@redhat6] jar xvf bxs_1.0.11.jar
解凍が始まる。system.xml にて、ポ－トの変更があれば実行。

[root@redhat6 bxs_1.0.11]# sh /usr/local/bxs_1.0.11/bin/bxs
Guessing BXS_HOME from bxs.sh to /usr/local/bxs_1.0.11/bin/..
Setting BXS_HOME to /usr/local/bxs_1.0.11/bin/..
Changed current directory: /usr/local/bxs_1.0.11
Using classpath: /usr/local/bxs_1.0.11/bin/../classes:webapps/soap:classes:src:b
in/lib/bxs.jar:bin/lib/hsql.jar:bin/lib/servlet23.jar:bin/lib/xerces.jar:/usr/local/jdk1.2.2/lib/tools.jar
************************************************
*  Baykit XML Server                           *
*                               Version 1.0.11 *
*           Copyright (C) 2000 Yokohama Baykit *
*                        http://www.baykit.org *
************************************************
bxs-home: /usr/local/bxs_1.0.11
Context : default
Context : demo
Context : Xi
Context : Cocoon
Context : Cocoon-Baykit
Context : HypersonicSQL
Context : Apache-SOAP
Port: 8088(http) OK
Port: 8008(ajp12) OK
Port: 8099(hsql) OK
Server 1.4 is running
Press [Ctrl]+[C] to abort

PROftpd install

proftpd-1.2.2rc2/src/io.c
proftpd-1.2.2rc2/src/log.c
proftpd-1.2.2rc2/src/main.c
proftpd-1.2.2rc2/src/modules.c
proftpd-1.2.2rc2/src/pool.c
proftpd-1.2.2rc2/src/proftpd.8
proftpd-1.2.2rc2/src/sets.c
proftpd-1.2.2rc2/src/support.c
proftpd-1.2.2rc2/src/timers.c
proftpd-1.2.2rc2/src/utils.c
proftpd-1.2.2rc2/src/xferlog.5
proftpd-1.2.2rc2/stamp-h
[root@redhat6 proftpd-1.2.2rc2]#./configure 

checking for fpathconf... yes
checking for setpassent... no
checking for setproctitle... no
checking for libutil.h... no
checking for setproctitle in -lutil... no
checking for sys/pstat.h... no
checking whether __progname and __progname_full are available... yes
checking which argv replacement method to use... writeable
updating cache ./config.cache
creating ./config.status
creating lib/Makefile
creating src/Makefile
creating modules/Makefile
creating Makefile
creating Make.rules
creating Make.modules
creating contrib/dist/rpm/proftpd.spec
creating config.h

[root@redhat6 proftpd-1.2.2rc2]# make
echo \#define BUILD_STAMP \"`date`\" > include/buildstamp.h
cd lib ; make lib
make[1]: Entering directory `/tmp/proftpd-1.2.2rc2/lib'
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c getopt.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c getopt1.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c pr_fnmatch.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c strsep.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c vsnprintf.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c glibc-glob.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c pwgrent.c
ar rc libsupp.a getopt.o getopt1.o pr_fnmatch.o strsep.o vsnprintf.o glibc-glob.
o pwgrent.o
ranlib libsupp.a
make[1]: Leaving directory `/tmp/proftpd-1.2.2rc2/lib'
cd src ; make src
make[1]: Entering directory `/tmp/proftpd-1.2.2rc2/src'
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c main.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c timers.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c sets.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c pool.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c dirtree.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c support.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c inet.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c log.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c io.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c ident.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c data.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c modules.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c auth.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c fs.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c ftpcount.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c utils.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c ftpwho.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c ftpshut.c
make[1]: Leaving directory `/tmp/proftpd-1.2.2rc2/src'
cd modules; make modules
make[1]: Entering directory `/tmp/proftpd-1.2.2rc2/modules'
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c mod_core.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c mod_auth.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c mod_xfer.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c mod_site.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c mod_ls.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c mod_unixpw.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c mod_log.c
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c mod_pam.c
srcdir=. ./glue.sh mod_core.o mod_auth.o mod_xfer.o mod_site.o mod_ls.o mod_unix
pw.o mod_log.o mod_pam.o
gcc  -DLINUX  -I.. -I../include  -O2 -Wall -DUSESHADOW -c module_glue.c
make[1]: Leaving directory `/tmp/proftpd-1.2.2rc2/modules'
gcc -Llib  -o proftpd src/main.o src/timers.o src/sets.o src/pool.o src/dirtree.
o src/support.o src/inet.o src/log.o src/io.o src/ident.o src/data.o src/modules
.o src/auth.o src/fs.o modules/mod_core.o modules/mod_auth.o modules/mod_xfer.o
modules/mod_site.o modules/mod_ls.o modules/mod_unixpw.o modules/mod_log.o modul
es/mod_pam.o  modules/module_glue.o -lsupp -lcrypt  -ldl -lpam
gcc -Llib  -o ftpcount src/ftpcount.o src/pool.o src/log.o src/utils.o -lsupp -l
crypt  -ldl -lpam
gcc -Llib  -o ftpwho src/ftpwho.o src/pool.o src/log.o src/utils.o -lsupp -lcryp
t  -ldl -lpam
gcc -Llib  -o ftpshut src/ftpshut.o -lsupp -lcrypt  -ldl -lpam

[root@redhat6 proftpd-1.2.2rc2]#make　install
cd lib ; make lib
make[1]: Entering directory `/tmp/proftpd-1.2.2rc2/lib'
make[1]: Nothing to be done for `lib'.
make[1]: Leaving directory `/tmp/proftpd-1.2.2rc2/lib'
cd src ; make src
make[1]: Entering directory `/tmp/proftpd-1.2.2rc2/src'
make[1]: Nothing to be done for `src'.
make[1]: Leaving directory `/tmp/proftpd-1.2.2rc2/src'
cd modules; make modules
make[1]: Entering directory `/tmp/proftpd-1.2.2rc2/modules'
make[1]: Nothing to be done for `modules'.
make[1]: Leaving directory `/tmp/proftpd-1.2.2rc2/modules'
gcc -Llib  -o proftpd src/main.o src/timers.o src/sets.o src/pool.o src/dirtree.
o src/support.o src/inet.o src/log.o src/io.o src/ident.o src/data.o src/modules
.o src/auth.o src/fs.o modules/mod_core.o modules/mod_auth.o modules/mod_xfer.o
modules/mod_site.o modules/mod_ls.o modules/mod_unixpw.o modules/mod_log.o modul
es/mod_pam.o  modules/module_glue.o -lsupp -lcrypt  -ldl -lpam
/usr/bin/install -c -s -o root -g root -m 0755 proftpd /usr/local/sbin/proftpd
if [ -f /usr/local/sbin/in.proftpd ] ; then \
  rm -f /usr/local/sbin/in.proftpd ; \
fi
ln -s proftpd /usr/local/sbin/in.proftpd
/usr/bin/install -c -s -o root -g root -m 0755 ftpcount /usr/local/bin/ftpcount
/usr/bin/install -c -s -o root -g root -m 0755 ftpwho /usr/local/bin/ftpwho
/usr/bin/install -c -s -o root -g root -m 0755 ftpshut /usr/local/sbin/ftpshut
if [ ! -f /usr/local/etc/proftpd.conf ] ; then \
  /usr/bin/install -c -o root -g root -m 0644 \
        ./sample-configurations/basic.conf \
        /usr/local/etc/proftpd.conf ; \
fi
/usr/bin/install -c -o root -g root -m 0644 ./src/proftpd.8 /usr/local/man/man8
/usr/bin/install -c -o root -g root -m 0644 ./src/ftpshut.8 /usr/local/man/man8
/usr/bin/install -c -o root -g root -m 0644 ./src/ftpwho.1 /usr/local/man/man1
/usr/bin/install -c -o root -g root -m 0644 ./src/ftpcount.1 /usr/local/man/man1
/usr/bin/install -c -o root -g root -m 0644 ./src/xferlog.5 /usr/local/man/man5
[root@redhat6 proftpd-1.2.2rc2]#/usr/loca/sbin/proftpd

13952 ?        S      0:00 proftpd (accepting connections)

DBD from Oracle and DB2

01/5/30 AS/400のデ－タをWebでアクセスの仕事があり、DBDのテストを始めています。うまくアクセス出来るかどうかは、不明です。
Linux+Apache+AS/400(DB)の構成を考えています。

[root@redhat6 DBI-1.13]#make install
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/DBI/W32ODBC.pm
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/DBI/Shell.pm
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/DBI/FAQ.pm
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/DBI/ProxyServer.pm
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/DBI/Format.pm
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/DBI/DBD.pm
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/DBD/ExampleP.pm
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/DBD/Proxy.pm
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/DBD/NullP.pm
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/DBD/Sponge.pm
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/DBD/ADO.pm
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/Bundle/DBI.pm
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/Win32/DBIODBC.pm
Installing /usr/lib/perl5/site_perl/5.005/i386-linux/DBI.pm
Installing /usr/man/man1/dbiproxy.1
Installing /usr/man/man1/dbish.1
Installing /usr/lib/perl5/man/man3/DBI::W32ODBC.3
Installing /usr/lib/perl5/man/man3/DBI::FAQ.3
Installing /usr/lib/perl5/man/man3/DBI::Shell.3
Installing /usr/lib/perl5/man/man3/DBI::Format.3
Installing /usr/lib/perl5/man/man3/DBI::ProxyServer.3
Installing /usr/lib/perl5/man/man3/Bundle::DBI.3
Installing /usr/lib/perl5/man/man3/DBI::DBD.3
Installing /usr/lib/perl5/man/man3/DBI.3
Installing /usr/lib/perl5/man/man3/Win32::DBIODBC.3
Installing /usr/lib/perl5/man/man3/DBD::Proxy.3
Installing /usr/lib/perl5/man/man3/DBD::ADO.3
Installing /usr/bin/dbiproxy
Installing /usr/bin/dbish
Writing /usr/lib/perl5/site_perl/5.005/i386-linux/auto/DBI/.packlist
Appending installation info to /usr/lib/perl5/5.00503/i386-linux/perllocal.pod
   
[oracle@redhat6 /tmp]$ tar zxvf DBD-Oracle-1_06_tar.gz
DBD-Oracle-1.06/
DBD-Oracle-1.06/Todo
DBD-Oracle-1.06/MANIFEST
DBD-Oracle-1.06/oci8.c
DBD-Oracle-1.06/Oracle.h
DBD-Oracle-1.06/ora_explain.PL
DBD-Oracle-1.06/t/
DBD-Oracle-1.06/t/reauth.t
DBD-Oracle-1.06/t/plsql.t
DBD-Oracle-1.06/t/general.t
DBD-Oracle-1.06/t/long.t
DBD-Oracle-1.06/t/base.t
DBD-Oracle-1.06/README.wingcc
DBD-Oracle-1.06/Oracle.xs
DBD-Oracle-1.06/hints/
DBD-Oracle-1.06/hints/svr4.pl
DBD-Oracle-1.06/Changes
DBD-Oracle-1.06/dbdimp.c
DBD-Oracle-1.06/README.explain
DBD-Oracle-1.06/README.win32
DBD-Oracle-1.06/dbdimp.h
DBD-Oracle-1.06/Oracle.ex/
DBD-Oracle-1.06/Oracle.ex/japh
DBD-Oracle-1.06/Oracle.ex/ex.pl
DBD-Oracle-1.06/Oracle.ex/proc.pl
DBD-Oracle-1.06/Oracle.ex/oradump.pl
DBD-Oracle-1.06/Oracle.ex/bind.pl
DBD-Oracle-1.06/Oracle.ex/commit.pl
DBD-Oracle-1.06/Oracle.ex/mktable.pl
DBD-Oracle-1.06/Oracle.ex/sql
DBD-Oracle-1.06/Oracle.ex/tabinfo.pl
DBD-Oracle-1.06/Oracle.ex/Readme
DBD-Oracle-1.06/README.longs
DBD-Oracle-1.06/README
DBD-Oracle-1.06/oci7.c
DBD-Oracle-1.06/README.sec
DBD-Oracle-1.06/test.pl
DBD-Oracle-1.06/README.login
DBD-Oracle-1.06/oraperl.ph
DBD-Oracle-1.06/Makefile.PL
DBD-Oracle-1.06/Oraperl.pm
DBD-Oracle-1.06/oci.def
DBD-Oracle-1.06/Oracle.pm
DBD-Oracle-1.06/README.help
DBD-Oracle-1.06/README.java
DBD-Oracle-1.06/ocitrace.h
DBD-Oracle-1.06/README.clients

[oracle@redhat6 DBD-Oracle-1.06]$ perl Makefile.PL
Using DBI 1.13 installed in /usr/lib/perl5/site_perl/5.005/i386-linux/auto/DBI

 Configuring DBD::Oracle ...

>>>     Remember to actually *READ* the README file!
        Especially if you have any problems.

  The ORACLE_HOME environment variable must be set.
  It must be set to hold the path to an Oracle installation directory
  on this machine (or a machine with a compatible architecture).
  See the README.clients file for more information.
  ABORTED!
[oracle@redhat6 DBD-Oracle-1.06]$
----- test source --------------------------------------------------------------------
          use DBI;
          #接続(別名oradbにSCOTT/TIGERでログイン）
          my $hDb = DBI->connect("dbi:Oracle:oradb", "scott/tiger") or die "CONNECT ERROR $DBI::errstr"; 
          #実行（SELECT以外）
          $hSt = $hDb->prepare("INSERT INTO TESTLNG VALUES (1, 'Prepare+Execute', NULL)");
          $nRes = $hSt->execute;
          #上記と同様
          $nRes = $hDb->do("INSERT INTO TESTLNG VALUES (1, 'DO', NULL)");
          # SELECTの場合
          #準備
          $hSt = $hDb->prepare("SELECT * FROM TESTLNG");
          #実行
          $nRes = $hSt->execute;
          #データの取得
          while($raRes = $hSt->fetchrow_arrayref) {
              print join("\t", @$raRes), "\n";    #タブ区切りで出力
          }
          $hSt->finish;
          $hDb->disconnect;
------------------------------------------------------------------
[db2@redhat6 DBD-DB2-0.75]$ perl Makefile.PL

Configuring DBD::DB2...
Remember to actually read the README and CAVEATS files!

Using DB2 in "/home/db2"
System: perl5.00503 DBI1.13 linux porky.devel.redhat.com 2.2.5-22smp #1 smp wed
jun 2 09:11:51 edt 1999 i686 unknown  i386-linux dl_dlopen.xs
Compiler: cc -O2 -Dbool=char -DHAS_BOOL -I/usr/local/include
Includes: -I"/home/db2/include" -I/usr/lib/perl5/site_perl/5.005/i386-linux/auto
/DBI
Libraries: -L/home/db2/lib -ldb2

Checking if your kit is complete...
Looks good
Note (probably harmless): No library found for -ldb2
Unquoted string "break" may clash with future reserved word at (eval 18) line 45
.
Useless use of a constant in void context at (eval 18) line 48.
Checking if your kit is complete...
Looks good
Writing Makefile for DBD::DB2::Constants
Writing Makefile for DBD::DB2

[db2@redhat6 DBD-DB2-0.75]$ make
mkdir blib
mkdir blib/lib
mkdir blib/lib/DBD
mkdir blib/arch
mkdir blib/arch/auto
mkdir blib/arch/auto/DBD
mkdir blib/arch/auto/DBD/DB2
mkdir blib/lib/auto
mkdir blib/lib/auto/DBD
mkdir blib/lib/auto/DBD/DB2
mkdir blib/man3
cp DB2.pod blib/lib/DBD/DB2.pod
cp DBI.pm blib/lib/DBD/DBI.pm
cp DB2.pm blib/lib/DBD/DB2.pm
cp lib/Bundle/DBD/DB2.pm blib/lib/Bundle/DBD/DB2.pm
make[1]: Entering directory `/tmp/DBD-DB2-0.75/Constants'
mkdir ../blib/lib/DBD/DB2
mkdir ../blib/arch/auto/DBD/DB2/Constants
mkdir ../blib/lib/auto/DBD/DB2/Constants
cp Constants.pm ../blib/lib/DBD/DB2/Constants.pm
AutoSplitting ../blib/lib/DBD/DB2/Constants.pm (../blib/lib/auto/DBD/DB2/Constants)
/usr/bin/perl -I/usr/lib/perl5/5.00503/i386-linux -I/usr/lib/perl5/5.00503 /usr/lib/perl5/5.00503/ExtUtils/xsubpp  -typemap /usr/lib/perl5/5.00503/ExtUtils/type
map Constants.xs >xstmp.c && mv xstmp.c Constants.c
cc -c -I"/home/db2/include" -Dbool=char -DHAS_BOOL -I/usr/local/include -O2    -
DVERSION=\"0.20\" -DXS_VERSION=\"0.20\" -fpic -I/usr/lib/perl5/5.00503/i386-linu
x/CORE  Constants.c
Constants.xs:16: sqlcli.h: No such file or directory
Constants.xs:17: sqlcli1.h: No such file or directory
Constants.xs:18: sqlext.h: No such file or directory
make[1]: *** [Constants.o] Error 1
make[1]: Leaving directory `/tmp/DBD-DB2-0.75/Constants'
make: *** [subdirs] Error 2
[db2@redhat6 DBD-DB2-0.75]$

Linux+ASP関連のリンク集

CGIのペ－ジ・・・Cool and Cool。

java scriptペ－ジ・・・java script。

Oracle8i install memoペ－ジ・・・Oracle8i install memo。

DJBDNS install memoペ－ジ・・・DJBDNS install memo。

PROftpd install memoペ－ジ・・・PROftpd インフォサイエンス。

qmail+vpopmail+qmailadmin install memoペ－ジ・・・qmail+vpopmail+qmailadmin install memo。

PROftpd install memoペ－ジ・・・PROftpd install memo(Plamo Linux)。

PS2 from Linuxペ－ジ・・・PS2 for Linux。

CU-seeme installペ－ジ・・・CU-seeme for Linux。

Linux Link・・・Linux Link関係。

ritsuo@mxy.mesh.ne.jp

☆ Linux奮闘記 (20) 輝く個人を目指して '2001/5- ☆

☆ Linux奮闘記 (20)　輝く個人を目指して　'2001/5- ☆