日医標準レセプトソフト(JMA-RECEIPT)関連の情報
商品名 | Kernel | XFree86 | gnome | wind manager | 動作 | 金額 | お勧め度 | 備考 |
Omoikane 1.2 | 2.2.18 | 3.3.6 | 1.2 | sawmill | ○ | 1,000 | ○ | 日本語環境の設定が不要 |
Omoikane 2.0 | 2.4 | 4.1 | 1.4 | sawfish | △ | 11,800(製品版) | ○ | Linux-Magazine 2002/02 添付 Nikkei-Linux 2002/04 (2.0.4)添付 |
Vine Linux 2.5(2.6) | 2.4 | 4.1 | 1.4 | sawfish | △ | - | ○ | 日経 Linux 2002/06 添付 Linux-World 2002/07 添付 http://www.teamgedoh.net/ |
Debian 3.0(woody) | 2.4.18 2.4.22 | 4.1 | 1.4 | sawfish | ○ | Unix USER | ◎ | user-ja等による日本語環境の設定が必要 |
Debian 3.0(sarge) | 2.4.20 | 4.2 | 2.2 | sawfish | ○ | -- | ○ | Woody-->Sargeへ移行、日本語環境の設定が不要 |
Omoikane 2.1 | 2.4.20 | 4.2 | 1.4 | sawfish | ○ | 12,800(製品版) | ◎ | Woody 対応、日本語環境の設定が不要 画面内容 |
Lindows 4.0 | 2.4.20 | 4.2 | 2.2 | sawfish | ○ | --(製品版) | ○ | Woody 対応、日本語環境の設定が不要 |
Debian | 2.4.24 | 4.3 | 2.2 | sawfish | ○ | -- | ○ | -- |
Debian 3.1 Sarge | 2.4.27 | 4.3 | 2.8 | --- | ○ | -- | ○ | 3.1.0a Sarge 新規導入 |
Redhat9,fedora | 2.4.24 | 4.3 | 2.2 | sawfish | ○ | -- | ○ | http://torca.hp.infoseek.co.jp/ |
商品名 | 導入方法 | 注意点、備考 |
Omoikane 1.2 | # apt-get install gdm # apt-get install task-orca # apt-get install libglade0 | task-orca-dev はインスト−ル不可 /etc/apt/sources.list 内容 deb ftp://ftp.jp.debian.org/debian potato main contrib non-free deb ftp://ftp.jp.debian.org/debian-non-US potato/non-US main contrib non-free deb ftp://ftp.orca.med.or.jp/pub/packages/debian unstable/orca main 参考 http://www.omoikane.co.jp |
Debian 2.2(potato)+XFree86-4 | # apt-get install x-window-system # xf86cfg # apt-get install icewm # apt-get install icewm-gnome # apt-get install gdm # apt-get install wget # apt-get install task-orca-dev $ user-ja-conf | ベ−スパッケ−ジ導入時に x-window system は導入しない 参考 http://topstudio.co.jp/~kmuto/debian/column/xf40.html postgresqlは初期導入しないほうが良い |
Omoikane 2.0 | # apt-get install orca-ogl | omoikane社のサイトからORCAのインスト−ル うまくXが設定出来ないときは、ogl-admin を利用して設定すると幸せになれます。ほとんどの場合、問題ないでしょう |
Vine Linux 2.5 | # apt-get install task-orca-standalon(orca,orca-client) | http://www.teamgedoh.net/からORCAのインスト−ル /etc/apt/sources.listにはホームページの指示どおりの2行 rpm http://isweb42.infoseek.co.jp/computer/tgedoh/aptdata orca i386 rpm-src http://isweb42.infoseek.co.jp/computer/tgedoh/aptdata orca i386 |
Debian 3.0(woody) | # apt-get install gdm # apt-get install task-jma-receipt $ user-ja-conf | ORCA ユ−ザで、user-ja-conf を忘れずに postgresqlは初期導入しないほうが良い |
Debian 3.0(sarge) | # apt-get remove gnome関連 sourceラインをsargeに変更 # apt-get dist-upgrade # apt-get install gnome関連 | postgresqlはholdを推奨、ただし運用は自己責任で |
Omoikane 2.1 | Omoikane導入後、apt-lineを日医標準レセプトに変更 # apt-get install task-jma-receipt | ほぼ完璧に入ります、ATOK,Mozilla,Acroread等も問題なし |
Lindows 4.0 | Lindows導入後、apt-lineを日医標準レセプトに変更 # apt-get install task-jma-receipt | ほぼ完璧に入ります、ATOK,Mozilla,Acroread等も問題なし、ただし運用は自己責任で |
Redhat9,fedora core-1 | http://torca.hp.infoseek.co.jp/からORCAのインスト−ル | 完璧に入ります、ただし運用は自己責任で |
Debian 3.1.0a(sarge) | # デスクトップ導入を推奨 sourceラインをwoodyに変更 # apt-get update後、apt-get install task-jma-receipt # apt-get install font関連 | ただし運用は自己責任で |
商品名 | Kernel | CPU | MEMO | レセ作成 | 診療データ | レセ枚数 | DISK装置 | jma-receipt Ver 備考 |
Debian Woody | 2.4.24 | Pen4 1.8MHZ | 512MB | 20min | 7,640件 | 1,740枚 | 40GB ATA100 HDD(7200回転) | Ver2.1.1 |
Debian Woody | 2.4.24 | Pen4 2.6MHZ | 512MB | 13min | 7,640件 | 1,740枚 | 40GB ATA100 HDD(7200回転) | Ver2.1.1 |
Debian Woody | 2.4.24 | Pen4 2.6MHZ | 1GB | 11min | 7,640件 | 1,740枚 | 40GB ATA100 HDD(7200回転) | Ver2.1.1 |
Debian Woody | 2.4.26-2-smp | Intel XEON 2.4MHZ*2 | 1GB | 13min | 7,640件 | 1,740枚 | 40GB ATA100 HDD(7200回転) | Ver2.3 |
Debian Woody | 2.4.24-64 | AMD64 | 1GB | --- | 7,640件 | 1,740枚 | 40GB ATA100 HDD(7200回転) | Ver2.1.1 |
Debian Woody | 2.4.24(32bit) | AMD64 | 1GB | 12min | 7,640件 | 1,740枚 | 40GB ATA100 HDD(7200回転) | Ver2.2.2 |
SUSE 9.0 | (64bit) | AMD64 | 1GB | --- | 7,640件 | 1,740枚 | 40GB ATA100 HDD(7200回転) | Ver2.2.2 |
Fedora | (64bit) | AMD64 | 1GB | --- | 7,640件 | 1,740枚 | 40GB ATA100 HDD(7200回転) | Ver2.2.2 |
プリンター | Kernel | CPU | MEMO | レセ印刷 | Filter |
RICOH NX-71 | 2.4.24 | Intel P4 | 512MB | 18枚/1min | GS 6.53 |
RICOH NX-85S | 2.4.24 | Intel P4 | 512MB | 18枚/1min | GS 6.53 |
RICOH CX3000 | 2.4.26-2-SMP | Intel XEON*2 | 1GB | 22枚/1min | Postscript |
EPSON LP9000C | 2.4.26-2-SMP | Intel XEON*2 | 1GB | 20枚/1min | Postscript |
# apt-get install atokx Reading Package Lists... Done Building Dependency Tree... Done Sorry, atokx is already the newest version. 0 packages upgraded, 0 newly installed, 0 to remove and 241 not upgraded. 1 packages not fully installed or removed. Need to get 0B of archives. After unpacking 0B will be used. atokx (1.0-9) を設定しています ... --09:30:38-- http://www3.justsystem.co.jp/download/atok/up/lin/atokx-1.0-1.i386.patch01.tgz => `/usr/lib/atokx/archive/atokx-1.0-1.i386.patch01.tgz' www3.justsystem.co.jp:80 に接続しています... 接続しました! HTTPリクエストを送信しました、応答を待っています... 200 OK 長さ: 380,085 [application/x-tar] 0K .......... .......... .......... .......... .......... 13% @ 101.42 KB/s 50K .......... .......... .......... .......... .......... 26% @ 150.60 KB/s 100K .......... .......... .......... .......... .......... 40% @ 208.33 KB/s 150K .......... .......... .......... .......... .......... 53% @ 153.37 KB/s 200K .......... .......... .......... .......... .......... 67% @ 154.32 KB/s 250K .......... .......... .......... .......... .......... 80% @ 137.74 KB/s 300K .......... .......... .......... .......... .......... 94% @ 183.15 KB/s 350K .......... .......... . 100% @ 156.86 KB/s 09:30:41 (149.31 KB/s) - `/usr/lib/atokx/archive/atokx-1.0-1.i386.patch01.tgz' を保存しました [380085/380085] --09:30:41-- http://www3.justsystem.co.jp/download/atok/up/lin/iiimf-1-2.i386.patch02.tgz => `/usr/lib/atokx/archive/iiimf-1-2.i386.patch02.tgz' www3.justsystem.co.jp:80 に接続しています... 接続しました! HTTPリクエストを送信しました、応答を待っています... 200 OK 長さ: 296,720 [application/x-tar] 0K .......... .......... .......... .......... .......... 17% @ 102.04 KB/s 50K .......... .......... .......... .......... .......... 34% @ 150.60 KB/s 100K .......... .......... .......... .......... .......... 51% @ 206.61 KB/s 150K .......... .......... .......... .......... .......... 69% @ 148.37 KB/s 200K .......... .......... .......... .......... .......... 86% @ 159.74 KB/s 250K .......... .......... .......... ......... 100% @ 158.43 KB/s 09:30:43 (147.39 KB/s) - `/usr/lib/atokx/archive/iiimf-1-2.i386.patch02.tgz' を 保存しました [296720/296720] Starting ATOKX server: atokmngdaemon htt. |
[root@vine_25 orca]# apt-get update ヒット http://isweb42.infoseek.co.jp orca/base/pkglist.i386 無視 http://isweb42.infoseek.co.jp orca release.i386 ヒット http://isweb42.infoseek.co.jp orca/base/srclist.i386 無視 http://isweb42.infoseek.co.jp orca release.i386 無視 http://isweb42.infoseek.co.jp orca/base/mirrors 無視 http://isweb42.infoseek.co.jp orca/base/mirrors ヒット ftp://ftp.jaist.ac.jp 2.5/i386/base/pkglist.main ヒット ftp://ftp.jaist.ac.jp 2.5/i386 release.main ヒット ftp://ftp.jaist.ac.jp 2.5/i386/base/pkglist.plus ヒット ftp://ftp.jaist.ac.jp 2.5/i386 release.plus ヒット ftp://ftp.jaist.ac.jp 2.5/i386/base/pkglist.plus-noarch ヒット ftp://ftp.jaist.ac.jp 2.5/i386 release.plus-noarch ヒット ftp://ftp.jaist.ac.jp 2.5/i386/base/srclist.main ヒット ftp://ftp.jaist.ac.jp 2.5/i386 release.main ヒット ftp://ftp.jaist.ac.jp 2.5/i386/base/srclist.plus ヒット ftp://ftp.jaist.ac.jp 2.5/i386 release.plus 取得:1 ftp://ftp.jaist.ac.jp 2.5/$(ARCH)/base/mirrors 無視 ftp://ftp.jaist.ac.jp 2.5/$(ARCH)/base/mirrors 取得:2 ftp://ftp.jaist.ac.jp 2.5/$(ARCH)/base/mirrors 無視 ftp://ftp.jaist.ac.jp 2.5/$(ARCH)/base/mirrors パッケージリストを読みこんでいます... 完了 依存情報ツリーを作成しています... 完了 W: http://isweb42.infoseek.co.jp/computer/tgedoh/aptdata/ は認証を省略します。 W: http://isweb42.infoseek.co.jp/computer/tgedoh/aptdata/ は認証を省略します。 W: ftp://ftp.jaist.ac.jp/os/linux/Vine/apt/ は認証を省略します。 W: ftp://ftp.jaist.ac.jp/os/linux/Vine/apt/ は認証を省略します。 [root@vine_25 orca]# apt-get dist-upgrade パッケージリストを読みこんでいます... 完了 依存情報ツリーを作成しています... 完了 アップグレードパッケージを検出しています... 完了 以下のパッケージが新たにインストールされます: ash 以下のパッケージがアップグレードされます: TrueType-kochi gtk+panda jmari-fonts orca orca-client panda-client panda-server task-orca-standalone 8 個のアップグレードパッケージ, 1 個の新規パッケージ, 0 個の削除/リプレースパッ ケージ, 0 個の保留パッケージがあります。 取得パッケージ: 16.1MB のアーカイブを取得します。インストール後は 396kB が使用さ れます。 続行しますか? [Y/n]Y 取得:1 http://isweb42.infoseek.co.jp orca/i386 gtk+panda 0.9.4-1vl1 [107kB] 取得:2 http://isweb42.infoseek.co.jp orca/i386 jmari-fonts 0.0.20020117-1vl4 [10 .0kB] 取得:3 http://isweb42.infoseek.co.jp orca/i386 orca 0.9.17-1vl6 [8971kB] 取得:4 ftp://ftp.jaist.ac.jp 2.5/i386/plus ash 0.2-27vl1 [177kB] 取得:5 ftp://ftp.jaist.ac.jp 2.5/i386/plus-noarch TrueType-kochi 4.3.1-0vl1 [637 1kB] 取得:6 http://isweb42.infoseek.co.jp orca/i386 orca-client 0.9.17-1vl6 [60.7kB] 取得:7 http://isweb42.infoseek.co.jp orca/i386 panda-client 1.0.3-1vl6 [34.4kB] 取得:8 http://isweb42.infoseek.co.jp orca/i386 panda-server 1.0.3-1vl6 [382kB] 取得:9 http://isweb42.infoseek.co.jp orca/i386 task-orca-standalone 0.9.17-0vl6 [1802B] 取得完了: 16.1MB を 1m45s (153kB/秒) RPM コマンドを実行しています (-U)... panda-client ################################################## ash ################################################## jmari-fonts ################################################## /usr/sbin/update-fonts-scale: warning: absolute path /usr/X11R6/lib/X11/fonts/Ty pe1 was provided. /usr/sbin/update-fonts-alias: warning: absolute path /usr/X11R6/lib/X11/fonts/Ty pe1 was provided. TrueType-kochi ################################################## panda-server ################################################## glserverを停止中: [ OK ] glauthを停止中: [ OK ] monitorを停止中: [ OK ] monitorを起動中: [ OK ] [ OK ]起動中: [ OK ] Waiting for bringing up monitor ... : ok. [ OK ]を起動中: [ OK ] orca ################################################## glserverを停止中: [ OK ] glauthを停止中: [ OK ] monitorを停止中: [ OK ] monitorを起動中: [ OK ] [ OK ]起動中: [ OK ] Waiting for bringing up monitor ... : ok. [ OK ]を起動中: [ OK ] 1 orca-client ################################################## /etc/X11/applnk/Applications を削除できません - ディレクトリが空でありません gtk+panda ################################################## [root@vine_25 orca]# |
woody:/home/orca# apt-get install mondo Reading Package Lists... Done Building Dependency Tree... Done The following extra packages will be installed: afio buffer bzip2 gawk liblzo1 lzop mindi mkisofs The following NEW packages will be installed: afio buffer bzip2 gawk liblzo1 lzop mindi mkisofs mondo 0 packages upgraded, 9 newly installed, 0 to remove and 95 not upgraded. Need to get 5073kB of archives. After unpacking 7378kB will be used. Do you want to continue? [Y/n] Y Get:1 ftp://ftp.jp.debian.org woody/main gawk 1:3.1.0-3 [670kB] Get:2 ftp://ftp.jp.debian.org woody/main afio 2.4.7-3 [65.5kB] Get:3 ftp://ftp.jp.debian.org woody/main bzip2 1.0.2-1 [229kB] Get:4 ftp://ftp.jp.debian.org woody/main liblzo1 1.07-1 [40.9kB] Get:5 ftp://ftp.jp.debian.org woody/main lzop 1.00-4 [68.9kB] Get:6 ftp://ftp.jp.debian.org woody/main mkisofs 4:1.10-7 [241kB] Get:7 ftp://ftp.jp.debian.org woody-proposed-updates/main mindi 0.58.r5-1woody1 [3573kB] Get:8 ftp://ftp.jp.debian.org woody/main buffer 1.19-2 [12.7kB] Get:9 ftp://ftp.jp.debian.org woody/main mondo 1.41.1-1 [172kB] Fetched 5073kB in 1m2s (81.1kB/s) 未選択パッケージ gawk を選択しています。 (データベースを読み込んでいます... 現在 45181 個のファイルとディレクトリがインス トールされています。) (.../gawk_1%3a3.1.0-3_i386.deb から) gawk を展開しています... 未選択パッケージ afio を選択しています。 (.../archives/afio_2.4.7-3_i386.deb から) afio を展開しています... 未選択パッケージ bzip2 を選択しています。 (.../bzip2_1.0.2-1_i386.deb から) bzip2 を展開しています... 未選択パッケージ liblzo1 を選択しています。 (.../liblzo1_1.07-1_i386.deb から) liblzo1 を展開しています... 未選択パッケージ lzop を選択しています。 (.../archives/lzop_1.00-4_i386.deb から) lzop を展開しています... 未選択パッケージ mkisofs を選択しています。 (.../mkisofs_4%3a1.10-7_i386.deb から) mkisofs を展開しています... 未選択パッケージ mindi を選択しています。 (.../mindi_0.58.r5-1woody1_i386.deb から) mindi を展開しています... 未選択パッケージ buffer を選択しています。 (.../buffer_1.19-2_i386.deb から) buffer を展開しています... 未選択パッケージ mondo を選択しています。 (.../mondo_1.41.1-1_i386.deb から) mondo を展開しています... gawk (3.1.0-3) を設定しています ... afio (2.4.7-3) を設定しています ... bzip2 (1.0.2-1) を設定しています ... liblzo1 (1.07-1) を設定しています ... lzop (1.00-4) を設定しています ... mkisofs (1.10-7) を設定しています ... mindi (0.58.r5-1woody1) を設定しています ... buffer (1.19-2) を設定しています ... mondo (1.41.1-1) を設定しています ... woody:/home/orca# woody:/home/orca# cdrecord -scanbus Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J・g Schilling Linux sg driver version: 3.1.24 Using libscg version 'schily-0.5' scsibus0: 0,0,0 0) 'TEAC ' 'CD-W552E ' '1.09' Removable CD-ROM 0,1,0 1) 'FUJITSU ' 'MCM3130AP ' '0030' Removable Optical Stor age 0,2,0 2) * 0,3,0 3) * 0,4,0 4) * 0,5,0 5) * 0,6,0 6) * 0,7,0 7) * ------------------------------------------------------------------------------- woody:/home/orca# mount -t iso9660 /dev/scd0 /cdrom mount: block device /dev/scd0 is write-protected, mounting read-only mount: wrong fs type, bad option, bad superblock on /dev/scd0, or too many mounted file systems woody:/home/orca# mount /cdrom mount: wrong fs type, bad option, bad superblock on /dev/scd0, or too many mounted file systems woody:/home/orca# mount -t iso9660 /dev/scd0 /cdrom mount: block device /dev/scd0 is write-protected, mounting read-only woody:/home/orca# cd /cdrom woody:/cdrom# ls README boot debian-jp debian-potato-2000-03-30 doc rr_moved README.ja debian debian-non-US dists inst woody:/cdrom# ------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # |
postgresql hold postgresql-client hold postgresql-contrib hold gs hold gs-common hold ------------------------------------------------------------ .gnomerc #!/usr/bin/env sh export LANG=ja_JP.eucJP export LANGUAGE=ja export XMODIFIERS=@im=htt xmodmap /home/orca/.xmodmap /usr/lib/im/locale/ja/atokserver/atokx_client & ---------------------------------------------------------------------- source.listをsarge用に変更 #Debian package deb ftp://ftp.dti.ad.jp/pub/Linux/debian sarge main contrib non-free deb ftp://ftp.dti.ad.jp/pub/Linux/debian-non-US sarge/non-US main contrib non-free deb ftp://ftp.dti.ad.jp/pub/Linux//debian-jp sarge-jp main contrib non-free #JMA-recept Package deb ftp://ftp.orca.med.or.jp/pub/debian woody jma ----------------------------------------------------------------------- woody:/home/orca# apt-get update Hit ftp://ftp.dti.ad.jp sarge/non-US/main Release Hit ftp://ftp.dti.ad.jp sarge/non-US/contrib Packages Hit ftp://ftp.dti.ad.jp sarge/non-US/contrib Release Hit ftp://ftp.dti.ad.jp sarge/non-US/non-free Packages Hit ftp://ftp.dti.ad.jp sarge/non-US/non-free Release Hit ftp://ftp.dti.ad.jp sarge-jp/main Packages Get:1 ftp://ftp.dti.ad.jp sarge-jp/main Release Ign ftp://ftp.dti.ad.jp sarge-jp/main Release Hit ftp://ftp.dti.ad.jp sarge-jp/contrib Packages Get:2 ftp://ftp.dti.ad.jp sarge-jp/contrib Release Ign ftp://ftp.dti.ad.jp sarge-jp/contrib Release Hit ftp://ftp.dti.ad.jp sarge-jp/non-free Packages Get:3 ftp://ftp.dti.ad.jp sarge-jp/non-free Release Ign ftp://ftp.dti.ad.jp sarge-jp/non-free Release Reading Package Lists... Done Building Dependency Tree... Done woody:/home/orca# apt-get remove gnome-core gnome-help gnome-help-data gnome-des ktop-data gnome-applets gnome-panel gnome-panel-data Reading Package Lists... Done Building Dependency Tree... Done Package gnome-help-data is not installed, so not removed Package gnome-desktop-data is not installed, so not removed The following extra packages will be installed: autoconf2.13 bonobo-activation cpp-3.2 debconf debconf-i18n defoma dialog esound-common fontconfig gcc-3.2-base gcc-3.3-base gconf2 libart-2.0-2 libasn1-6-heimdal libatk1.0-0 libbonobo-activation4 libbonobo2-0 libbonobo2-common libc6 libc6-dev libcdparanoia0 libcomerr1-kerberos4kth libdb1-compat libdb3 libdb4.0 libesd0 libexpat1 libfontconfig1 libfreetype6 libgcc1 libgconf11 libgconf2-4 libgcrypt1 libgdbm3 libglade2-0 libglib2.0-0 libgnome2-common libgnomecanvas2-0 libgnomecanvas2-common libgnomeui-common libgnutls7 libgtk2.0-0 libgtk2.0-common libidl0 libkrb-1-kerberos4kth libkrb5-17-heimdal liblinc1 liblocale-gettext-perl libncurses5 libncursesw5 libnewt0.51 libnss-db libopencdk4 liborbit0 liborbit2 libpango1.0-0 libpango1.0-common libperl5.8 libpgperl libpng12-0 libpopt0 libpq3 libroken16-kerberos4kth libssl0.9.7 libstdc++5 libtasn1-0 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libxft2 libxml2 libxrender1 libxslt1 locales perl perl-base perl-modules slang1a-utf8 whiptail xbase-clients xfree86-common xlibmesa3-glu xlibs The following packages will be REMOVED: gnome-applets gnome-core gnome-help gnome-panel gnome-panel-data gnome-session gnome-utils The following NEW packages will be installed: bonobo-activation cpp-3.2 debconf-i18n fontconfig gcc-3.2-base gcc-3.3-base gconf2 libart-2.0-2 libasn1-6-heimdal libatk1.0-0 libbonobo-activation4 libbonobo2-0 libbonobo2-common libcomerr1-kerberos4kth libdb1-compat libdb4.0 libfontconfig1 libgconf2-4 libgcrypt1 libgdbm3 libglade2-0 libglib2.0-0 libgnome2-common libgnomecanvas2-0 libgnomecanvas2-common libgnomeui-common libgnutls7 libgtk2.0-0 libgtk2.0-common libidl0 libkrb-1-kerberos4kth libkrb5-17-heimdal liblinc1 liblocale-gettext-perl libncursesw5 libnewt0.51 libopencdk4 liborbit2 libpango1.0-0 libpango1.0-common libperl5.8 libpng12-0 libpq3 libroken16-kerberos4kth libssl0.9.7 libstdc++5 libtasn1-0 libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libxft2 libxrender1 slang1a-utf8 xlibmesa3-glu 29 packages upgraded, 54 newly installed, 7 to remove and 325 not upgraded. Need to get 35.8MB of archives. After unpacking 17.5MB will be used. Do you want to continue? [Y/n] Y Get:1 ftp://ftp.dti.ad.jp sarge/main libdb1-compat 2.1.3-7 [30.8kB] Get:2 ftp://ftp.dti.ad.jp sarge/main libdb3 3.2.9-19 [230kB] Get:3 ftp://ftp.dti.ad.jp sarge/main libnss-db 2.2-6.2 [20.2kB] Get:4 ftp://ftp.dti.ad.jp sarge/main libc6-dev 2.3.2-7 [2558kB] Get:5 ftp://ftp.dti.ad.jp sarge/main locales 2.3.2-7 [3799kB] Get:6 ftp://ftp.dti.ad.jp sarge/main libc6 2.3.2-7 [3717kB] Get:7 ftp://ftp.dti.ad.jp sarge/main autoconf2.13 2.13-48 [365kB] Get:8 ftp://ftp.dti.ad.jp sarge/main perl-modules 5.8.0-18 [1947kB] Get:9 ftp://ftp.dti.ad.jp sarge/main libdb4.0 4.0.14-1.3 [302kB] Get:10 ftp://ftp.dti.ad.jp sarge/main libgdbm3 1.8.3-2 [21.3kB] Get:11 ftp://ftp.dti.ad.jp sarge/main perl 5.8.0-18 [3858kB] Get:12 ftp://ftp.dti.ad.jp sarge/main libcomerr1-kerberos4kth 1.2.2-2 [64.7kB] Get:13 ftp://ftp.dti.ad.jp sarge/main libasn1-6-heimdal 0.5.2-2 [63.2kB] Get:14 ftp://ftp.dti.ad.jp sarge/main libssl0.9.7 0.9.7c-5 [2008kB] Get:15 ftp://ftp.dti.ad.jp sarge/main libkrb-1-kerberos4kth 1.2.2-2 [103kB] Get:16 ftp://ftp.dti.ad.jp sarge/main libroken16-kerberos4kth 1.2.2-2 [93.2kB] Get:17 ftp://ftp.dti.ad.jp sarge/main libkrb5-17-heimdal 0.5.2-2 [114kB] Get:18 ftp://ftp.dti.ad.jp sarge/main libpq3 7.3.2r1-5 [88.3kB] Get:19 ftp://ftp.dti.ad.jp sarge/main libperl5.8 5.8.0-18 [489kB] Get:20 ftp://ftp.dti.ad.jp sarge/main libpgperl 7.3.2r1-5 [104kB] Get:21 ftp://ftp.dti.ad.jp sarge/main perl-base 5.8.0-18 [731kB] Get:22 ftp://ftp.dti.ad.jp sarge/main liblocale-gettext-perl 1.01-17 [16.8kB] Get:23 ftp://ftp.dti.ad.jp sarge/main libtext-iconv-perl 1.2-2 [11.9kB] Get:24 ftp://ftp.dti.ad.jp sarge/main libtext-charwidth-perl 0.04-1 [11.0kB] Get:25 ftp://ftp.dti.ad.jp sarge/main libtext-wrapi18n-perl 0.06-1 [8442B] Get:26 ftp://ftp.dti.ad.jp sarge/main debconf-i18n 1.3.15 [52.1kB] Get:27 ftp://ftp.dti.ad.jp sarge/main libncursesw5 5.3.20030719-1 [271kB] Get:28 ftp://ftp.dti.ad.jp sarge/main dialog 0.9b-20031002-1 [149kB] Get:29 ftp://ftp.dti.ad.jp sarge/main slang1a-utf8 1.4.9-2 [298kB] Get:30 ftp://ftp.dti.ad.jp sarge/main libnewt0.51 0.51.4-18 [48.9kB] Get:31 ftp://ftp.dti.ad.jp sarge/main libpopt0 1.7-2 [29.1kB] Get:32 ftp://ftp.dti.ad.jp sarge/main whiptail 0.51.4-18 [28.7kB] Get:33 ftp://ftp.dti.ad.jp sarge/main debconf 1.3.15 [84.6kB] Get:34 ftp://ftp.dti.ad.jp sarge/main libncurses5 5.3.20030719-1 [262kB] Get:35 ftp://ftp.dti.ad.jp sarge/main libgcrypt1 1.1.12-4 [126kB] tosh/fi を新規にインストールしています .. . 設定ファイル /etc/X11/xkb/symbols/macintosh/fr を新規にインストールしています .. . 設定ファイル /etc/X11/xkb/symbols/macintosh/fr_CH を新規にインストールしています ... 設定ファイル /etc/X11/xkb/symbols/macintosh/gb を新規にインストールしています .. . 設定ファイル /etc/X11/xkb/symbols/macintosh/it を新規にインストールしています .. . 設定ファイル /etc/X11/xkb/symbols/macintosh/nl を新規にインストールしています .. . 設定ファイル /etc/X11/xkb/symbols/macintosh/no を新規にインストールしています .. . 設定ファイル /etc/X11/xkb/symbols/macintosh/pt を新規にインストールしています .. . 設定ファイル /etc/X11/xkb/symbols/macintosh/se を新規にインストールしています .. . 設定ファイル /etc/X11/xkb/symbols/macintosh/us を新規にインストールしています .. . 設定ファイル /etc/X11/xkb/symbols/mk を新規にインストールしています ... 設定ファイル /etc/X11/xkb/symbols/nec/jp を新規にインストールしています ... 設定ファイル /etc/X11/xkb/symbols/no を新規にインストールしています ... 設定ファイル /etc/X11/xkb/symbols/pc104 を新規にインストールしています ... 設定ファイル /etc/X11/xkb/symbols/pl を新規にインストールしています ... 設定ファイル /etc/X11/xkb/symbols/pt を新規にインストールしています ... 設定ファイル /etc/X11/xkb/symbols/ralt を新規にインストールしています ... 設定ファイル /etc/X11/xkb/symbols/ro を新規にインストールしています ... 設定ファイル /etc/X11/xkb/symbols/ru を新規にインストールしています ... 設定ファイル /etc/X11/xkb/symbols/se を新規にインストールしています ... 設定ファイル /etc/X11/xkb/symbols/si を新規にインストールしています ... 設定ファイル /etc/X11/xkb/symbols/sk を新規にインストールしています ... 設定ファイル /etc/X11/xkb/symbols/sk_qwerty を新規にインストールしています ... 設定ファイル /etc/X11/xkb/symbols/sony/us を新規にインストールしています ... 設定ファイル /etc/X11/xkb/symbols/sr を新規にインストールしています ... 設定ファイル /etc/X11/xkb/symbols/sun/se を新規にインストールしています ... 設定ファイル /etc/X11/xkb/symbols/sun/us を新規にインストールしています ... 設定ファイル /etc/X11/xkb/symbols/th を新規にインストールしています ... 設定ファイル /etc/X11/xkb/symbols/tr を新規にインストールしています ... 設定ファイル /etc/X11/xkb/symbols/ua を新規にインストールしています ... 設定ファイル /etc/X11/xkb/symbols/us を新規にインストールしています ... 設定ファイル /etc/X11/xkb/symbols/us_group3 を新規にインストールしています ... 設定ファイル /etc/X11/xkb/symbols/us_intl を新規にインストールしています ... 設定ファイル /etc/X11/xkb/symbols/vn を新規にインストールしています ... 設定ファイル /etc/X11/xkb/symbols/xfree68/amiga を新規にインストールしています . .. 設定ファイル /etc/X11/xkb/symbols/xfree68/ataritt を新規にインストールしています ... 設定ファイル /etc/X11/xkb/types.dir を新規にインストールしています ... 設定ファイル /etc/X11/xkb/types/complete を新規にインストールしています ... 設定ファイル /etc/X11/xkb/types/default を新規にインストールしています ... 設定ファイル /etc/X11/xkb/types/extra を新規にインストールしています ... xbase-clients (4.2.1-12.1) を設定しています ... 設定ファイル /etc/X11/app-defaults/Editres を新規にインストールしています ... 設定ファイル /etc/X11/app-defaults/Editres-color を新規にインストールしています ... 設定ファイル /etc/X11/app-defaults/XConsole を新規にインストールしています ... 設定ファイル /etc/X11/app-defaults/XF86Cfg を新規にインストールしています ... 設定ファイル /etc/X11/app-defaults/XFontSel を新規にインストールしています ... 設定ファイル /etc/X11/app-defaults/Xedit を新規にインストールしています ... 設定ファイル /etc/X11/app-defaults/Xedit-color を新規にインストールしています .. . 設定ファイル /etc/X11/app-defaults/Xvidtune を新規にインストールしています ... libgconf11 (1.0.9-5.1) を設定しています ... libxrender1 (0.8.3-4) を設定しています ... libxft2 (2.1.2-4) を設定しています ... libpango1.0-common (1.2.5-1.1) を設定しています ... Updating the modules list for Pango-1.2.0...done. Cleaning up font configuration of pango... Updating font configuration of pango... Cleaning up category xfont.. Updating category xfont.. libpango1.0-0 (1.2.5-1.1) を設定しています ... libgtk2.0-common (2.2.4-1) を設定しています ... Updating the IM modules list for GTK+-2.2.0...done. Updating the gdk-pixbuf loaders list for GTK+-2.2.0...done. libgtk2.0-0 (2.2.4-1) を設定しています ... gconf2 (2.2.1-4) を設定しています ... libgconf2-4 (2.2.1-4) を設定しています ... libbonobo2-common (2.2.3-1) を設定しています ... libglade2-0 (2.0.1-5) を設定しています ... libgnome2-common (2.2.3-2) を設定しています ... libgnomecanvas2-0 (2.2.1-3) を設定しています ... woody:/home/orca# apt-get upgrade Reading Package Lists... Done Building Dependency Tree... Done The following packages have been kept back ash bind9-host console-tools cpp debianutils dnsutils docbook-xml dpkg e2fsprogs file fileutils freewnn-jserver g++ gcc gdk-imlib1 gdm gimp1.2 gnome-control-center gnome-terminal gnupg gs gs-common iamerican ibritish icewm icewm-common icewm-gnome imlib1 initrd-tools ispell libgtkhtml20 libgtkxmhtml1 libldap2 libmng1 libpaperg libpng2 libruby lprng lynx menu mindi mondo mutt ppp pppoeconf python python-newt python2.1 rep-gtk-gnome reportbug ruby sawfish-gnome shellutils sysvinit tasksel textutils vacation wenglish x-window-system-core xlibmesa3 xprt 261 packages upgraded, 0 newly installed, 0 to remove and 64 not upgraded. Need to get 129MB of archives. After unpacking 36.3MB will be used. Do you want to continue? [Y/n]Y Running update-fonts-dir in 75dpi font directory...done. Running update-fonts-alias in 75dpi font directory...done. xfonts-a12k12 (1-7) を設定しています ... xfonts-intl-japanese (1.2.1-1) を設定しています ... Reloading X font server configuration...done. xfonts-intl-japanese-big (1.2.1-1) を設定しています ... Reloading X font server configuration...done. xfonts-kappa20 (0.395-1) を設定しています ... xfonts-scalable (4.2.1-12.1) を設定しています ... Running update-fonts-scale in Speedo font directory...done. Running update-fonts-dir in Speedo font directory...done. Running xftcache in Speedo font directory...done. Running update-fonts-scale in Type1 font directory...done. Running update-fonts-dir in Type1 font directory...done. Running xftcache in Type1 font directory...done. xfonts-shinonome (4-1) を設定しています ... xmanpages-ja (4.1.0.20011224-2) を設定しています ... rep (0.16.2-5) を設定しています ... librep9 (0.16.2-5) を設定しています ... rep-gtk (0.18-2) を設定しています ... libstdc++2.10-dev (2.95.4-19) を設定しています ... g++-2.95 (2.95.4-19) を設定しています ... xserver-xfree86 (4.2.1-12.1) を設定しています ... yc-el (3.5.8-1) を設定しています ... install/yc-el: Byte-compiling for emacs20 ... done. biff (0.17.pre20000412-1.3) を設定しています ... buffer (1.19-3) を設定しています ... egg (4.0.6+0.20020909cvs-3) を設定しています ... install/egg: Byte-compiling for emacs20 ... done. kterm (6.2.0-41) を設定しています ... libgdbmg1 (1.7.3-28) を設定しています ... libssl0.9.6 (0.9.6j-1) を設定しています ... nowebm (2.10c-2) を設定しています ... skk (10.62a-6) を設定しています ... install/apel: Byte-compiling for emacs20 ... skipped. (already compiled) install/skk: Handling install for emacsen flavor emacs20 tcsh-kanji (6.12.00-8) を設定しています ... 設定ファイル /etc/csh.cshrc を新規にインストールしています ... 設定ファイル /etc/csh.login を新規にインストールしています ... 設定ファイル /etc/csh.logout を新規にインストールしています ... woody:/home/orca# apt-get install gnome-applets gnome-panel gnome-panel-data パッケージリストを読みこんでいます... 完了 依存関係ツリーを作成しています... 完了 以下の特別パッケージがインストールされます: gnome-desktop-data gnome-session libapm1 libbonoboui2-0 libbonoboui2-common libfam0c102 libgail-common libgail17 libgnome-desktop-2 libgnome2-0 libgnomeui-0 libgnomevfs2-0 libgnomevfs2-common libgtop2 libpanel-applet2-0 libstartup-notification0 libwnck-common libwnck4 powermgmt-base 提案パッケージ: yelp gnome-help-data doc-base 推奨パッケージ: imagemagick 以下のパッケージは削除されます: libfam0 以下のパッケージが新たにインストールされます: gnome-applets gnome-desktop-data gnome-panel gnome-panel-data gnome-session libapm1 libbonoboui2-0 libbonoboui2-common libfam0c102 libgail-common libgail17 libgnome-desktop-2 libgnome2-0 libgnomeui-0 libgnomevfs2-0 libgnomevfs2-common libgtop2 libpanel-applet2-0 libstartup-notification0 libwnck-common libwnck4 powermgmt-base 0 upgraded, 22 newly installed, 削除: 1 個、保留: 64 個 7653kB のアーカイブを取得する必要があります。 展開後に追加で 30.6MB のディスク容量が消費されます。 続行しますか? [Y/n]Y 取得:1 ftp://ftp.dti.ad.jp sarge/main powermgmt-base 1.17 [10.7kB] 取得:2 ftp://ftp.dti.ad.jp sarge/main libapm1 3.2.0-6 [21.3kB] 取得:3 ftp://ftp.dti.ad.jp sarge/main libfam0c102 2.6.10-4 [22.0kB] 取得:4 ftp://ftp.dti.ad.jp sarge/main libgnomevfs2-common 2.2.5-3 [425kB] 取得:5 ftp://ftp.dti.ad.jp sarge/main libgnomevfs2-0 2.2.5-3 [88.8kB] 取得:6 ftp://ftp.dti.ad.jp sarge/main libgnome2-0 2.2.3-2 [124kB] 取得:7 ftp://ftp.dti.ad.jp sarge/main libbonoboui2-common 2.2.4-2 [266kB] 取得:8 ftp://ftp.dti.ad.jp sarge/main libbonoboui2-0 2.2.4-2 [192kB] 取得:9 ftp://ftp.dti.ad.jp sarge/main libgail17 1.2.2-1 [65.7kB] 取得:10 ftp://ftp.dti.ad.jp sarge/main libgail-common 1.2.2-1 [124kB] を読み込んでいます... 現在 45177 個のファイルとディレクトリがインス トールされています。) (.../powermgmt-base_1.17_i386.deb から) powermgmt-base を展開しています... 未選択パッケージ libapm1 を選択しています。 (.../libapm1_3.2.0-6_i386.deb から) libapm1 を展開しています... 未選択パッケージ libfam0c102 を選択しています。 (.../libfam0c102_2.6.10-4_i386.deb から) libfam0c102 を展開しています... 未選択パッケージ libgnomevfs2-common を選択しています。 (.../libgnomevfs2-common_2.2.5-3_i386.deb から) libgnomevfs2-common を展開してい ます... 未選択パッケージ libgnomevfs2-0 を選択しています。 (.../libgnomevfs2-0_2.2.5-3_i386.deb から) libgnomevfs2-0 を展開しています... 未選択パッケージ libgnome2-0 を選択しています。 (.../libgnome2-0_2.2.3-2_i386.deb から) libgnome2-0 を展開しています... 未選択パッケージ libbonoboui2-common を選択しています。 (.../libbonoboui2-common_2.2.4-2_i386.deb から) libbonoboui2-common を展開してい ます... 未選択パッケージ libbonoboui2-0 を選択しています。 (.../libbonoboui2-0_2.2.4-2_i386.deb から) libbonoboui2-0 を展開しています... 未選択パッケージ libgail17 を選択しています。 (.../libgail17_1.2.2-1_i386.deb から) libgail17 を展開しています... 未選択パッケージ libgail-common を選択しています。 (.../libgail-common_1.2.2-1_i386.deb から) libgail-common を展開しています... 未選択パッケージ libgnomeui-0 を選択しています。 (.../libgnomeui-0_2.2.2-2_i386.deb から) libgnomeui-0 を展開しています... 未選択パッケージ libgtop2 を選択しています。 (.../libgtop2_2.0.5-3_i386.deb から) libgtop2 を展開しています... 未選択パッケージ libpanel-applet2-0 を選択しています。 (.../libpanel-applet2-0_2.2.2.2-2_i386.deb から) libpanel-applet2-0 を展開してい ます... 未選択パッケージ libstartup-notification0 を選択しています。 (.../libstartup-notification0_0.5-4_i386.deb から) libstartup-notification0 を展 開しています... 未選択パッケージ libgnome-desktop-2 を選択しています。 (.../libgnome-desktop-2_2.2.2-1_i386.deb から) libgnome-desktop-2 を展開していま す... 未選択パッケージ libwnck-common を選択しています。 (.../libwnck-common_2.2.2-1_all.deb から) libwnck-common を展開しています... 未選択パッケージ libwnck4 を選択しています。 (.../libwnck4_2.2.2-1_i386.deb から) libwnck4 を展開しています... 未選択パッケージ gnome-panel-data を選択しています。 (.../gnome-panel-data_2.2.2.2-2_all.deb から) gnome-panel-data を展開しています. .. dpkg: 警告 - 古いファイル`/etc/gnome/panel-config/panel.d/default'の削除ができま せん: ディレクトリは空ではありません dpkg: 警告 - 古いファイル`/etc/gnome/panel-config/panel.d'の削除ができません: デ ィレクトリは空ではありません dpkg: 警告 - 古いファイル`/etc/gnome/panel-config'の削除ができません: ディレクト リは空ではありません 未選択パッケージ gnome-desktop-data を選択しています。 (.../gnome-desktop-data_2.2.2-1_all.deb から) gnome-desktop-data を展開していま す... 未選択パッケージ gnome-session を選択しています。 (.../gnome-session_2.2.2-4_i386.deb から) gnome-session を展開しています... 未選択パッケージ gnome-panel を選択しています。 (.../gnome-panel_2.2.2.2-2_i386.deb から) gnome-panel を展開しています... 未選択パッケージ gnome-applets を選択しています。 (.../gnome-applets_2.2.3-1_i386.deb から) gnome-applets を展開しています... powermgmt-base (1.17) を設定しています ... libapm1 (3.2.0-6) を設定しています ... libfam0c102 (2.6.10-4) を設定しています ... libgail17 (1.2.2-1) を設定しています ... libgail-common (1.2.2-1) を設定しています ... libgtop2 (2.0.5-3) を設定しています ... libstartup-notification0 (0.5-4) を設定しています ... libwnck-common (2.2.2-1) を設定しています ... libwnck4 (2.2.2-1) を設定しています ... gnome-desktop-data (2.2.2-1) を設定しています ... libgnomevfs2-0 (2.2.5-3) を設定しています ... libgnomevfs2-common (2.2.5-3) を設定しています ... libgnome2-0 (2.2.3-2) を設定しています ... libbonoboui2-common (2.2.4-2) を設定しています ... libbonoboui2-0 (2.2.4-2) を設定しています ... libgnomeui-0 (2.2.2-2) を設定しています ... libpanel-applet2-0 (2.2.2.2-2) を設定しています ... libgnome-desktop-2 (2.2.2-1) を設定しています ... gnome-session (2.2.2-4) を設定しています ... gnome-panel (2.2.2.2-2) を設定しています ... 設定ファイル /etc/menu-methods/gnome-panel を新規にインストールしています ... gnome-panel-data (2.2.2.2-2) を設定しています ... 設定ファイル /etc/sound/events/mailcheck.soundlist を新規にインストールしていま す ... gnome-applets (2.2.3-1) を設定しています ... woody:/home/orca# apt-get dist-upgrade パッケージリストを読みこんでいます... 完了 依存関係ツリーを作成しています... 完了 アップグレードパッケージを検出しています... 完了 以下のパッケージは削除されます: console-tools-libs liblcms libnkf-ruby 以下のパッケージが新たにインストールされます: coreutils cpp-3.3 dash dictionaries-common dosfstools dselect e2fslibs g++-3.3 gcc-3.3 icewm-gnome-support initscripts libblkid1 libcomerr2 libconsole libdb4.1 libdbd-pg-perl libdbi-perl libdns11 libgal23 libgnutls5 libgsf-1 libidn9 libisc7 libkrb53 liblcms1 libmagic1 libmetacity0 libpaper-utils libpaper1 libpcap0.7 libpng10-0 librsvg2-2 libsasl2 libss2 libstdc++5-3.3-dev libtextwrap1 libuuid1 libvte-common libvte4 libwnn0 mindi-kernel module-init-tools python2.2 python2.3 sawfish symlinks sysv-rc wamerican xlibmesa3-gl xprt-common 以下のパッケージは保留されます gs gs-common 以下のパッケージはアップグレードされます ash bind9-host console-tools cpp debianutils dnsutils docbook-xml dpkg e2fsprogs file fileutils freewnn-jserver g++ gcc gdk-imlib1 gdm gimp1.2 gnome-control-center gnome-terminal gnupg iamerican ibritish icewm icewm-common icewm-gnome imlib1 initrd-tools ispell libgtkhtml20 libgtkxmhtml1 libldap2 libmng1 libpaperg libpng2 libruby lprng lynx menu mindi mondo mutt ppp pppoeconf python python-newt python2.1 rep-gtk-gnome reportbug ruby sawfish-gnome shellutils sysvinit tasksel textutils vacation wenglish x-window-system-core xlibmesa3 xprt 62 upgraded, 50 newly installed, 削除: 3 個、保留: 2 個 64.7MB のアーカイブを取得する必要があります。 展開後に追加で 78.3MB のディスク容量が消費されます。 続行しますか? [Y/n]Y 取得:1 ftp://ftp.dti.ad.jp sarge/main console-tools 1:0.2.3dbs-44 [297kB] 取得:2 ftp://ftp.dti.ad.jp sarge/main libconsole 1:0.2.3dbs-44 [108kB] 取得:3 ftp://ftp.dti.ad.jp sarge/main sysv-rc 2.85-7 [23.2kB] 取得:4 ftp://ftp.dti.ad.jp sarge/main dselect 1.10.15 [94.7kB] 取得:5 ftp://ftp.dti.ad.jp sarge/main dpkg 1.10.15 [1133kB] Loading 00debian-vars... Loading 20apel (source)... Loading 50autoconf (source)... Loading 50dictionaries-common (source)... Loading /var/cache/dictionaries-common/emacsen-ispell-dicts.el (source)... (Next Ispell command will use default dictionary) Loading 50egg-init (source)... Loading 50gettext (source)... Loading 50nowebm (source)... Loading 50sawfish (source)... Loading 50skk (source)... Loading skk-autoloads... Loading 50yc-el-init (source)... Wrote /usr/share/emacs20/site-lisp/sawfish/sawfish.elc Done Setting up sawfish-gnome (1.3-5) ... Setting up xlibmesa3-gl (4.2.1-12.1) ... Setting up xlibmesa3 (4.2.1-12.1) ... Setting up x-window-system-core (4.2.1-12.1) ... Setting up xprt-common (0.0.8.cvs20030508-6) ... Starting Xprint servers: Xprt. Setting up xprt (4.2.1-12.1) ... Setting up lprng (3.8.22-2) ... Installing new version of config file /etc/lprng/lpd.perms ... Installing new version of config file /etc/lprng/lpd.conf ... Starting printer spooler: lprng. Setting up python2.3 (2.3.2-2) ... Compiling python modules in /usr/lib/python2.3 ... Compiling optimized python modules in /usr/lib/python2.3 ... Setting up reportbug (2.34) ... Installing new version of config file /etc/reportbug.conf ... Setting up libtextwrap1 (0.1-1) ... Setting up tasksel (1.36) ... Setting up ispell (3.1.20.0-3) ... Setting up iamerican (3.1.20.0-3) ... Setting up g++-3.3 (3.3.2-1) ... Setting up libstdc++5-3.3-dev (3.3.2-1) ... Setting up g++ (3.3.1-2) ... Setting up python (2.3.2-2) ... Setting up python-newt (0.51.4-18) ... Setting up ibritish (3.1.20.0-3) ... woody:/home/orca# apt-get install gnome-common E: 不正な操作 unstall woody:/home/orca# apt-get install gnome-common パッケージリストを読みこんでいます... 完了 依存関係ツリーを作成しています... 完了 以下の特別パッケージがインストールされます: automake1.4 pkg-config 提案パッケージ: libgnome-dev 以下のパッケージは削除されます: automake 以下のパッケージが新たにインストールされます: automake1.4 gnome-common pkg-config 0 upgraded, 3 newly installed, 削除: 1 個、保留: 2 個 352kB のアーカイブを取得する必要があります。 展開後に追加で 315kB のディスク容量が消費されます。 続行しますか? [Y/n]Y 取得:1 ftp://ftp.dti.ad.jp sarge/main automake1.4 1:1.4-p6-8 [271kB] 取得:2 ftp://ftp.dti.ad.jp sarge/main pkg-config 0.15.0-2 [38.3kB] 取得:3 ftp://ftp.dti.ad.jp sarge/main gnome-common 1.2.4-4 [42.3kB] 352kB を 4s で取得しました (76.2kB/s) dpkg: automake: dependency problems, but removing anyway as you request: autoproject depends on automake | automake1.7 | automaken; however: Package automake is to be removed. Package automake1.7 is not installed. Package automaken is not installed. (Reading database ... 49532 files and directories currently installed.) Removing automake ... Selecting previously deselected package automake1.4. (Reading database ... 49437 files and directories currently installed.) Unpacking automake1.4 (from .../automake1.4_1%3a1.4-p6-8_all.deb) ... Selecting previously deselected package pkg-config. Unpacking pkg-config (from .../pkg-config_0.15.0-2_i386.deb) ... Selecting previously deselected package gnome-common. Unpacking gnome-common (from .../gnome-common_1.2.4-4_all.deb) ... Setting up automake1.4 (1.4-p6-8) ... Setting up pkg-config (0.15.0-2) ... Setting up gnome-common (1.2.4-4) ... woody:/home/orca# |
antivir-workstation-2.0.8/LICENSE antivir-workstation-2.0.8/LICENSE.DE antivir-workstation-2.0.8/CHANGES orca@woody:~/antivir$ cd antivir-workstation-2.0.8 orca@woody:~/antivir/antivir-workstation-2.0.8$ su Password: woody:/home/orca/antivir/antivir-workstation-2.0.8# ./install Starting AntiVir for UNIX Workstation 2.0.8 installation... 1) installing command line scanner creating install directory /usr/lib/AntiVir ... done checking for existing /etc/antivir.conf ... not found copying bin/antivir to /usr/lib/AntiVir ... done copying vdf/antivir.vdf to /usr/lib/AntiVir ... done copying conf/antivir.conf to /etc ... done copying sh/configantivir to /usr/lib/AntiVir ... done Would you like to create a link in /usr/bin ? [y] linking /usr/bin/antivir to /usr/lib/AntiVir/antivir ... done installation of command line scanner complete 2) installing automatic internet updater An automatic internet updater is available with version 2.0.8 of AntiVir for UNIX. This is a daemon that will run in the background and automatically check for updates (internet access is required). You may also manually check for updates using: antivir --update You do not need to install the automatic internet updater in order to manually check for updates. Please read the README file for more information on updates and how they can best suit you. Would you like to install the automatic internet updater? [n] y copying sh/avupdater to /usr/lib/AntiVir ... done Would you like the automatic updater to start automatically? [y] identifying startup script location ... found (/etc/) linking /etc/rc(LEVEL).d/(S/K)20avupdater to /usr/lib/AntiVir/avupdater ... runlevel 0 ... done runlevel 1 ... done runlevel 2 ... done runlevel 3 ... done runlevel 4 ... done runlevel 5 ... done runlevel 6 ... done installation of automatic internet updater complete 3) installing AvGuard Version 2.0.8 of AntiVir for UNIX is capable of on-access, real-time scanning of files. This provides the ultimate protection against viruses and other unwanted software. The on-access scanner (called AvGuard) is based on Dazuko, a free software project providing AntiVir Status: avupdater (not running). Here are some commands that you should remember... AntiVir ======= configure: /usr/lib/AntiVir/configantivir Automatic Internet Updater ========================== start: /usr/lib/AntiVir/avupdater start stop: /usr/lib/AntiVir/avupdater stop check: /usr/lib/AntiVir/avupdater status Press |
woody:/home/orca# apt-get install kernel-package woody:/home/orca# apt-get install libncurses5-dev 構築に必要なパッケージの導入をしておくこと http://www.kernel.org/pub/linux/kernel/v2.4/ woody:/home/orca# mv linux-2.4.22.tar.gz /usr/src woody:/home/orca# mv patch-2.4.22.gz /usr/src woody:/home/orca# mv linux-2.4.21-ipvs-1.0.10.patch.gz /usr/src woody:/home/orca# mv ipvs-1.0.10.tar.gz /usr/src woody:/home/orca# cd /usr/src woody:/home/orca# tar zxvf linux-2.4.22.tar.gz linux-2.4.22/Documentation/SAK.txt linux-2.4.22/Documentation/mips/ linux-2.4.22/Documentation/mips/time.README linux-2.4.22/Documentation/mips/GT64120.README linux-2.4.22/Documentation/mips/pci/ linux-2.4.22/Documentation/mips/pci/pci.README linux-2.4.22/Documentation/power/ linux-2.4.22/Documentation/power/pci.txt linux-2.4.22/Documentation/README.nsp_cs.eng woody:/usr/src/ipvs-1.0.10# make patchkernel cat linux_net_netsyms_c.diff | (cd /usr/src/linux && patch -p1) patching file net/netsyms.c Hunk #1 succeeded at 265 with fuzz 2 (offset 17 lines). cat linux_net_Makefile.diff | (cd /usr/src/linux && patch -p1) patching file net/Makefile Hunk #1 succeeded at 46 with fuzz 2 (offset 1 line). cat linux_net_ipv4_Config_in.diff | (cd /usr/src/linux && patch -p1) patching file net/ipv4/Config.in Hunk #1 succeeded at 43 (offset -4 lines). cat linux_ip_fw_compat_c.diff | (cd /usr/src/linux && patch -p1) patching file net/ipv4/netfilter/ip_fw_compat.c cat linux_kernel_ksyms_c.diff | (cd /usr/src/linux && patch -p1) patching file kernel/ksyms.c Hunk #1 succeeded at 130 with fuzz 2 (offset 3 lines). woody:/usr/src/ipvs-1.0.10# make installsource cp -p ipvs/ip_vs.h /usr/src/linux/include/net/ if [ ! -d /usr/src/linux/net/ipv4/ipvs ]; then \ mkdir -p /usr/src/linux/net/ipv4/ipvs; \ fi cp -p ipvs/Config.in /usr/src/linux/net/ipv4/ipvs/ cp -p ipvs/linux_net_ipv4_ipvs_Makefile /usr/src/linux/net/ipv4/ipvs/Makefile cp -p ipvs/*.c /usr/src/linux/net/ipv4/ipvs/ scripts/fixheader.pl /usr/src/linux/net/ipv4/ipvs/*.c woody:/usr/src/ipvs-1.0.10# make menuconfig(必要なパラメータ修正,,,scsi,net,tcp/ip等は必ず設定すること) Linux Kernel v2.4.22 Configuration qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq Main Menu qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk x Arrow keys navigate the menu. |
woody:/home/orca# apt-get install grub Reading Package Lists... Done Building Dependency Tree... Done The following NEW packages will be installed: grub 0 packages upgraded, 1 newly installed, 0 to remove and 2 not upgraded. Need to get 247kB of archives. After unpacking 504kB will be used. Get:1 ftp://ftp.jp.debian.org woody/main grub 0.91-2 [247kB] Fetched 247kB in 7s (32.2kB/s) 未選択パッケージ grub を選択しています。 (データベースを読み込んでいます... 現在 46424 個のファイルとディレクトリがインス トールされています。) (.../archives/grub_0.91-2_i386.deb から) grub を展開しています... grub (0.91-2) を設定しています ... woody:/home/orca# grub-install /dev/hda Probing devices to guess BIOS drives. This may take a long time. Installation finished. No error reported. This is the contents of the device map /boot/grub/device.map. Check if this is correct or not. If any of the lines is incorrect, fix it and re-run the script `grub-install'. (fd0) /dev/fd0 (hd0) /dev/hda woody:/home/orca# update-grub Searching for GRUB installation directory ... found: /boot/grub . Testing for an existing GRUB menu.list file... Could not find /boot/grub/menu.lst file. Would you like one generated for you? ( y/N) y Updating /boot/grub/menu.lst ... done Please note that configuration parameters for GRUB are stored in /boot/grub/menu.lst . You must edit this file in order to set the options which GRUB passes to the kernel, as well as the drive which GRUB looks in to for the kernel. Everything on the line after "kopt=" is passed to the kernel as parameters, and "groot=" must be set to the partition(in GRUB terms, such as "(hd0,0)") which GRUB will load the kernel from. After you have edited /boot/grub/menu.lst , please re-run 'update-grub'. woody:/home/orca# |
oody:/home/orca# dpkg -l nfs-* 要望=(U)不明/(I)インストール/(R)削除/(P)完全削除/(H)維持 | 状態=(N)無/(I)インストール済/(C)設定/(U)展開/(F)設定失敗/(H)半インストール |/ エラー=(空欄)無/(H)維持/(R)要再インストール/X=両方(状態,エラーの大文字=異常) ||/ 名前 バージョン 説明 +++-==============-==============-============================================ un nfs-client <なし> (説明(description)がありません) ii nfs-common 1.0-2woody1 NFS support files common to client and serve ii nfs-kernel-ser 1.0-2woody1 Kernel NFS server support un nfs-server <なし> (説明(description)がありません) un nfs-user-serve <なし> (説明(description)がありません) woody:/home/orca# |
kernelをとりあえず、カーネル再構築 2.4.24にする、Character devicesでi810-865,DRI,DRM関連を設定 woody:/home/orca/dripkg# dpkg -l xfree86* 要望=(U)不明/(I)インストール/(R)削除/(P)完全削除/(H)維持 | 状態=(N)無/(I)インストール済/(C)設定/(U)展開/(F)設定失敗/(H)半インストール |/ エラー=(空欄)無/(H)維持/(R)要再インストール/X=両方(状態,エラーの大文字=異常) ||/ 名前 バージョン 説明 +++-==============-==============-============================================ ii xfree86-common 4.3.0-0pre1v5 X Window System (XFree86) infrastructure intel のサイトより、Linux版 20030425-i386.tar.gz (810-865G)対応をとってくる。少し古いものだと、865等が入っていない。私も、これで半日潰しました。 woody:/home/orca# tar zxvf 20030425-i386.tar.gz woody:/home/orca# cd dripkg X-windows を停止しておく woody:/home/orca# ./install.sh woody:/home/orca# enter 5回程度 完了、下記のホルダ内へセットされる woody:/usr/X11R6/lib/modules/drivers# ls apm_drv.o i810_drv.o s3_drv.o ark_drv.o i810_drv.o.dri-old s3virge_drv.o ati_drv.o woody:/lib/modules/2.4.24/kernel/drivers/char/agp# ls agpgart.o agpgart.o.dri-old woody:/lib/modules/2.4.24/kernel/drivers/char/drm# ls i810.o i830.o i830.o.dri-old startx 無事X-windowがスタートする。 XFree86.0.log の一部抜粋 II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.2.1.1, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.3 (II) I810: Driver for Intel i810 chipset: i810, i810-dc100, i810e, i815, i830M, 845G, 855GM, 865G (II) Primary Device is: PCI 00:02:0 (--) Assigning device section with no busID to primary device (--) Chipset 865G found 大成功 !!!! |
SUSEサイトより、gcc for X84_64,postgresql7.3.4 for X84_64 のインストール 標準インストールでは入っていない、依存性を確認しながら入れてくれる exportにて、postgresql_home,lib.dataパス、LD_LIBRARY_PATH等の指定 pg_ctl -W -d startにてPostgresql スタート、initdb,createuser orca,createdb orca データのload(psql -e orca < dump_file) linux:/home/orca # rpm -q postgresql-* postgresql-7.3.4-50 linux:/home/orca # rpm -qR postgresql-* postgresql-libs rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 ld-linux-x86-64.so.2()(64bit) libc.so.6()(64bit) libcrypt.so.1()(64bit) libcrypto.so.0.9.7()(64bit) libdl.so.2()(64bit) libm.so.6()(64bit) libncurses.so.5()(64bit) libnsl.so.1()(64bit) libpam.so.0()(64bit) libpq.so.3()(64bit) libreadline.so.4()(64bit) libresolv.so.2()(64bit) libssl.so.0.9.7()(64bit) libz.so.1()(64bit) /bin/sh libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.3)(64bit) rpmlib(PayloadIsBzip2) <= 3.0.5-1 linux:/home/orca # |
先日は、SUSE9.0 for AMD64を導入しましたが、最近Fedora Core-1でも 同様にリリースされました、isoイメージを落として導入してみました。 LANカード sis系を認識しない、ここはスタンダードの3Com-、無事認識する。 |
ruby-dev,ruby-Postrgres モジュール等の導入 --------------------ruby pg --------------------------- #!/usr/bin/env ruby # # メール送信スクリプト # require 'net/smtp' require 'kconv' require 'postgres' to = [] # 送付先アドレスを配列にセットする def get_addr(addr) ARGF.each { |line| if /^#/ =~ line next end addr.push line.chomp if line } end # base64 encode def b64_encode(str) estr = Kconv.tojis(str) estr = estr.split(//, 1).pack('m') estr = estr.chomp end # メイン if $0 == __FILE__ ENV['HOSTNAME'] = `/bin/hostname`.chomp get_addr(to) if to.empty? STDERR.puts "No e-mail address list.\n" exit 1 end conn = PGconn.connect("localhost", 5432, "", "", "orca") res = conn.exec("select * from tbl_syskanri;") conn = PGconn.connect("172.21.20.42", 5432, "", "", "orca") res1 = conn.exec("select * from tbl_syskanri;") if res.num_tuples == res1.num_tuples print "OK\n" exit 1 else print "ng\n" end subj = 'ORCA-Watch警報メール' from = 'orca' # for Header From part body = ++BODY 不一致が発生しました。 BODY sender = 'rfujii@fukuyama.kkmiuraco.jp' subj = b64_encode(subj) from = b64_encode(from) to.each do |to_addr| head = ++HEAD Subject: =?ISO-2022-JP?B?#{subj}?= To: #{to_addr} From: =?ISO-2022-JP?B?#{from}?= Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Type: Text/Plain; charset=iso-2022-jp HEAD src = head + "\n" + Kconv.tojis(body) # メールを送信.ブロック付のstartを使えばfinishを省略できる # startの第3引数はなくても可. Net::SMTP.start('172.21.1.6', 25, 'kkmiura.co.jp') { |smtp| smtp.send_mail(src, sender, to_addr) } end end -------------------------------------------------------------- ruby db_check.rb mail.txt |
woody:/home/orca# apt-get install ftpmirror Reading Package Lists... Done Building Dependency Tree... Done The following NEW packages will be installed: ftpmirror 0 packages upgraded, 1 newly installed, 0 to remove and 3 not upgraded. Need to get 51.8kB of archives. After unpacking 229kB will be used. Get:1 http://ftp.jp.debian.org woody/main ftpmirror 1.2l-7 [51.8kB] Fetched 51.8kB in 0s (73.9kB/s) # Config file for Debian's ftpmirror package. # # daily, weekly, and monthly specify files, which are placed in # /etc/ftpmirror, contain lists of package names to be mirrored every # all ftp session will be listed if ftp-debug is 1. /etc/ftpmirror/default内の ftp-server と remote-directory,local-directoryの設定必要 woody:/etc/ftpmirror# /usr/sbin/ftpmirror orca package orca started at 2004-08-19 11:30:08 success to login 172.21.20.42/orca. remote directory is /home/orca/orca42. local directory is /home/orca/orca37. + ./ps.log ... getting done + ./sis900.o ... getting done package orca done at 2004-08-19 11:30:11 woody:/etc/ftpmirror# |
woody:/home/orca# apt-get install gpg gpg --gen-key とタイプして、あとは指示に従う。分からないところはデフォルトを選択しておけば良い。 orca@woody:~$ gpg -ear orca37 himitsu.txt (公開鍵orca37を使用して暗号化) gpg: 注意: 秘密鍵C7F70CCDは保護されていません。 orca@woody:~$vi himitsu.txt.asc の中身 -----BEGIN PGP MESSAGE----- Version: GnuPG v1.0.6 (GNU/Linux) Comment: KUHASIKU WA http://www.gnupg.org/ WO GORANKUDASAI hQEOA9x16FyoK5EFEAP5AQt3P0gdkyuGLvaRLL4qrRh4Ti/UZLeD3jo/FmGzMtNu JTmBvvOBWpNHt637dJuPhyY2NPGNw8oUOmdOlcGb5KzcXsH9wbCPmsmPAoPjtuQY QBMWRLz8AvjjUVm9i86BckZ/B3I29Vdp2s9T5SD/h/f4RCoj43SrqYJqQVXw5hQD /3dpLxk3mWd9H79rJKGEBVh5d/ixeH6pTiP5Q3e69lXvcnp3aH5npzCR8ovOelfv Y1iNkGZ29GZv/dE8dJItvLRdhgJ/UbaOzw3H/lILDVh7tN5uxja+58kGlN2fgiCO S99/zNFkVkA4azQAw6Nvz1ONVvTpoxQbOQhpbLE1CW2+0k8BFLZGseyP5ZJ1mP3C Nz9Mps+KNaHJXD9UamgvVbFxpt7TjV/6y1Bh3hrahEtGP3cjtVPrfCf6AK9rcWmd PQK5bEo+N5HqgCgWy2sq8aut =g2MC -----END PGP MESSAGE----- 問題なく暗号化されていますね。 orca@woody:~$ gpg himitsu.txt.asc gpg: 注意: 秘密鍵C7F70CCDは保護されていません。 gpg: 1024-ビットELG-E鍵, ID A82B9105で暗号化2004-08-19にできました "orca37 |
2004/08/07 Woody Sarge RC1 がリリースされた。ATOK-X を導入。一度、woodyのapt-lineにしてインストール。問題なく導入できた。 --17:13:25-- http://www3.justsystem.co.jp/download/atok/up/lin/atokx-1.0-1.i386 .patch01.tgz => `/usr/lib/atokx/archive/atokx-1.0-1.i386.patch01.tgz' www3.justsystem.co.jp をDNSに問いあわせています... 163.44.16.241 www3.justsystem.co.jp[163.44.16.241]:80 に接続しています... 接続しました。 HTTP による接続要求を送信しました、応答を待っています... 200 OK 長さ: 380,085 [application/x-tar] 100%[====================================>] 380,085 116.84K/s ETA 00:00 17:13:29 (116.79 KB/s) - `/usr/lib/atokx/archive/atokx-1.0-1.i386.patch01.tgz' を保存しました [380085/380085] --17:13:29-- http://www3.justsystem.co.jp/download/atok/up/lin/iiimf-1-2.i386.p atch02.tgz => `/usr/lib/atokx/archive/iiimf-1-2.i386.patch02.tgz' www3.justsystem.co.jp をDNSに問いあわせています... 163.44.16.241 www3.justsystem.co.jp[163.44.16.241]:80 に接続しています... 接続しました。 HTTP による接続要求を送信しました、応答を待っています... 200 OK 長さ: 296,720 [application/x-tar] 100%[====================================>] 296,720 506.03K/s 17:13:30 (505.20 KB/s) - `/usr/lib/atokx/archive/iiimf-1-2.i386.patch02.tgz' を 保存しました [296720/296720] Starting ATOKX server: atokmngdaemon htt. sarge:/home/orca# |
2004/08 Dolphin がリリースされた。早速導入。 ホームページに記載されている手順で問題なく導入可能、ORCA側のClaim設定とWin側のOpenDolphinのクライアント設定をすれば動作。 オープンソースの電子カルテは少ないので、うまく使いこなせれば効果は高いと思う、サポトー契約をされたほうが安価かもしれない。 スタンプさえしっかり作れば、有償の他社のカルテ同様に個人的には使えると思いましたが、複数台で使用すると、はたしてうまく動作するかは少し疑問が残りました。 |
woody 3.1.0a インストール(デスクトップ)、sources.listをwoody に変更して apt-get install task-jma-receipt 提案パッケージ: xtt-fonts xfs-xtt imlib-progs xfonts-shinonome xfonts-a12k12 postgresql-doc libgtk-ruby libpgperl libpgjava libpgtcl postgresql-dev postgresql-contrib python-pygresql pgdocs pgmonitor python2.1-doc ruby-examples irb skk ddskk task-jma-receipt-desktop jma-receipt-fdd tcsh-i18n 推奨パッケージ: gsfonts-x11 gs-ja canna-canadamed canna-cannadic jma-receipt-dbbackup 以下のパッケージは「削除」されます: tcsh 以下のパッケージが新たにインストールされます: canna-utils dia-orca dia-orca-print freewnn-common freewnn-jserver gdk-imlib1 gnome-bin gnome-libs-data jma-fonts jma-receipt kinput2-canna-wnn kterm libart2 libcob08 libfixed0 libghttp1 libglade-panda-gnome0 libglade-panda0 libglib1.2 libgmp3 libgnome32 libgnomesupport0 libgnomeui32 libgnorba27 libgnorbagtk0 libgtk1.2 libgtk1.2-common libgtkpanda0 libgtkxmhtml1 libmondai1 libnkf-ruby liborbit0 libpanda libpgsql2 libpng2 libruby libssl0.9.6 libstdc++2.10-glibc2.2 libtiff3g libuconv-ruby libwnn6 libxml-parser-ruby libxml1 lv monpe nkf open-cobol panda-client panda-server postgresql postgresql-client python2.1 ruby skkdic skkserv task-jma-receipt task-jma-receipt-client task-jma-receipt-server tcsh-kanji twm user-ja アップグレード: 0 個、新規インストール: 61 個、削除: 1 個、保留: 0 個。 52.6MB のアーカイブを取得する必要があります。 展開後に追加で 343MB のディスク容量が消費されます。 続行しますか? [Y/n] Y 取得:1 http://ftp.jp.debian.org woody/main libgtk1.2-common 1.2.10-11 [207kB] 取得:2 http://ftp.orca.med.or.jp woody/jma dia-orca 0.84-020118-1+0jma2 [483kB] 取得:3 http://ftp.orca.med.or.jp woody/jma dia-orca-print 0.2-1+0jma1 [8042B] 取得:4 http://ftp.orca.med.or.jp woody/jma jma-fonts 20040915-0+0jma1 [23.1kB] 取得:5 http://ftp.orca.med.or.jp woody/jma libcob08 0.8.9-3+0jma2 [27.4kB] 取得:6 http://ftp.orca.med.or.jp woody/jma libfixed0 020608-0+0jma1 [14.3kB] 取得:7 http://ftp.orca.med.or.jp woody/jma libmondai1 1.2.2-0+1jma1 [36.7kB] 取得:8 http://ftp.orca.med.or.jp woody/jma libpanda 1:1.2.2-0+1jma1 [81.9kB] 取得:9 http://ftp.orca.med.or.jp woody/jma panda-server 1:1.2.2-0+1jma1 [520kB] 取得:10 http://ftp.jp.debian.org woody/main libglib1.2 1.2.10-4 [112kB] 取得:11 http://ftp.jp.debian.org woody/main libgtk1.2 1.2.10-11 [795kB] 取得:12 http://ftp.orca.med.or.jp woody/jma open-cobol 0.8.9-3+0jma2 [98.6kB] 取得:13 http://ftp.orca.med.or.jp woody/jma monpe 0.6.3-0+1jma1 [614kB] 取得:14 http://ftp.jp.debian.org woody/main libstdc++2.10-glibc2.2 1:2.95.4-11wo ody1 [142kB] 取得:15 http://ftp.jp.debian.org woody/main libpng2 1.0.12-3.woody.9 [107kB] 取得:16 http://ftp.jp.debian.org woody/main libssl0.9.6 0.9.6c-2.woody.7 [462kB] 取得:17 http://ftp.jp.debian.org woody/main python2.1 2.1.3-3 [1591kB] 取得:18 http://ftp.orca.med.or.jp woody/jma jma-receipt 1:2.5.0-2+0jma2 [38.2MB] 取得:19 http://ftp.jp.debian.org woody/main canna-utils 3.5b2-46.2 [85.2kB] 取得:20 http://ftp.jp.debian.org woody/main libtiff3g 3.5.5-6.woody5 [81.3kB] 取得:21 http://ftp.jp.debian.org woody/main gdk-imlib1 1.9.14-2woody2 [69.3kB] 取得:22 http://ftp.jp.debian.org woody/main libart2 1.4.1.4-3 [45.0kB] 取得:23 http://ftp.jp.debian.org woody/main libxml1 1:1.8.17-2woody2 [183kB] 取得:24 http://ftp.jp.debian.org woody/main libnkf-ruby 1.6.7-3woody4 [133kB] 取得:25 http://ftp.jp.debian.org woody/main libruby 1.6.7-3woody4 [561kB] 取得:26 http://ftp.jp.debian.org woody/main libuconv-ruby 0.4.9-1 [137kB] 取得:27 http://ftp.jp.debian.org woody/main libxml-parser-ruby 0.6.1-3 [113kB] 取得:28 http://ftp.jp.debian.org woody/main freewnn-common 1.1.0+1.1.1-a017-7 [3 5.2kB] 取得:29 http://ftp.jp.debian.org woody/main freewnn-jserver 1.1.0+1.1.1-a017-7 [ 1470kB] 取得:30 http://ftp.jp.debian.org woody/main gnome-libs-data 1.4.1.4-3 [286kB] 取得:31 http://ftp.jp.debian.org woody/main libgnome32 1.4.1.4-3 [74.8kB] 取得:32 http://ftp.jp.debian.org woody/main libgnomesupport0 1.4.1.4-3 [23.5kB] 取得:33 http://ftp.jp.debian.org woody/main libgnomeui32 1.4.1.4-3 [418kB] 取得:34 http://ftp.jp.debian.org woody/main liborbit0 0.5.16-1 [171kB] 取得:35 http://ftp.jp.debian.org woody/main libgnorba27 1.4.1.4-3 [52.1kB] 取得:36 http://ftp.jp.debian.org woody/main libgnorbagtk0 1.4.1.4-3 [42.6kB] 取得:37 http://ftp.jp.debian.org woody/main gnome-bin 1.4.1.4-3 [91.2kB] 取得:38 http://ftp.jp.debian.org woody/main libgmp3 4.0.1-3 [251kB] 取得:39 http://ftp.jp.debian.org woody/main libpgsql2 7.2.1-2woody8 [66.3kB] 取得:40 http://ftp.jp.debian.org woody/main postgresql-client 7.2.1-2woody8 [282 kB] 取得:41 http://ftp.jp.debian.org woody/main postgresql 7.2.1-2woody8 [1554kB] 取得:42 http://ftp.jp.debian.org woody/main ruby 1.6.7-3woody4 [142kB] 取得:43 http://ftp.jp.debian.org woody/main nkf 1.92-6 [33.3kB] 取得:44 http://ftp.jp.debian.org woody/main libwnn6 1.0.0-11 [86.7kB] 取得:45 http://ftp.jp.debian.org woody/main libghttp1 1.0.9-9 [29.8kB] 取得:46 http://ftp.jp.debian.org woody/main libgtkxmhtml1 1.4.1.4-3 [172kB] 取得:47 http://ftp.jp.debian.org woody/main lv 4.49.4-7woody2 [414kB] 取得:48 http://ftp.jp.debian.org woody/main skkdic 20011121-1 [1082kB] 取得:49 http://ftp.jp.debian.org woody/main user-ja 0.29 [6620B] 取得:50 http://ftp.jp.debian.org woody/main skkserv 10.62a-4woody1 [12.3kB] 取得:51 http://ftp.jp.debian.org woody/main tcsh-kanji 6.11.00-2.1 [227kB] 取得:52 http://ftp.jp.debian.org woody/main twm 4.1.0-16woody6 [152kB] 取得:53 http://ftp.jp.debian.org woody/main kterm 6.2.0-40 [100kB] 以下省略 orca@sarge:~$ dpkg -l jma-re* 要望=(U)不明/(I)インストール/(R)削除/(P)完全削除/(H)維持 | 状態=(N)無/(I)インストール済/(C)設定/(U)展開/(F)設定失敗/(H)半インストール |/ エラー=(空欄)無/(H)維持/(R)要再インストール/X=両方(状態,エラーの大文字=異常) ||/ 名前 バージョン 説明 +++-==============-==============-============================================ ii jma-receipt 2.5.0-2+0jma2 JMA Standard Receipt Computer Software un jma-receipt-db <なし> (説明(description)がありません) un jma-receipt-fd <なし> (説明(description)がありません) un jma-receipt-ho <なし> (説明(description)がありません) | 状態=(N)無/(I)インストール済/(C)設定/(U)展開/(F)設定失敗/(H)半インストール |/ エラー=(空欄)無/(H)維持/(R)要再インストール/X=両方(状態,エラーの大文字=異常) ||/ 名前 バージョン 説明 +++-==============-==============-============================================ ii ruby 1.6.7-3woody4 An interpreter of object-oriented scripting orca@sarge:~$ dpkg -l postgres postgres に一致するパッケージが見つかりません。 orca@sarge:~$ dpkg -l postgres* 要望=(U)不明/(I)インストール/(R)削除/(P)完全削除/(H)維持 | 状態=(N)無/(I)インストール済/(C)設定/(U)展開/(F)設定失敗/(H)半インストール |/ エラー=(空欄)無/(H)維持/(R)要再インストール/X=両方(状態,エラーの大文字=異常) ||/ 名前 バージョン 説明 +++-==============-==============-============================================ un postgres95 <なし> (説明(description)がありません) ii postgresql 7.2.1-2woody8 Object-relational SQL database, descended fr ii postgresql-cli 7.2.1-2woody8 Front-end programs for PostgreSQL un postgresql-con <なし> (説明(description)がありません) un postgresql-dev <なし> (説明(description)がありません) un postgresql-doc <なし> (説明(description)がありません) un postgresql-pl <なし> (説明(description)がありません) un postgresql-tes <なし> (説明(description)がありません) orca@sarge:~$ dpkg -l dia-* 要望=(U)不明/(I)インストール/(R)削除/(P)完全削除/(H)維持 | 状態=(N)無/(I)インストール済/(C)設定/(U)展開/(F)設定失敗/(H)半インストール |/ エラー=(空欄)無/(H)維持/(R)要再インストール/X=両方(状態,エラーの大文字=異常) ||/ 名前 バージョン 説明 +++-==============-==============-============================================ un dia-common <なし> (説明(description)がありません) ii dia-orca 0.84-020118-1+ Diagram editor ORCA version ii dia-orca-print 0.2-1+0jma1 ORCA print system support libraries orca@sarge:~$ |
Eclips on COBOL & Ruby |
Copyright(C) 2002-2005